Is the image signal format setting correct?Change the setting according to the signal for the connected equipment. s"Signal" - "Video Signal" p.43
Do the image signal resolution and the refresh rate
correspond to the mode?
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate
output from the computer. s"List of Supported Monitor Displays" p.116
CheckRemedy
Are the cables connected correctly?Check that all the cables required for projection are securely connected. sQuick Start Guide
Is the correct input port selected?Change the image by pressing the [Source Search] button on the remote control or the control panel.
sp.19
Is the power for the computer or video source turned on?Turn the power on for the equipment.
Are the image signals being output to the projector?If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you
need to change the output to an external destination as well as the computer's own monitor. For some
computer models, when the image signals are output externally, they no longer appear on the LCD monitor
or accessory monitor. sComputer's documentation, under a title such as "External output" or "Connecting
an external monitor".
If the connection is made while the power of the projector or computer is already turned on, the function
[Fn] key that changes the computer's image signal to external output may not work. Turn the power for the
computer and the projector off and then back on again.
CheckRemedy
Is the focus adjusted correctly?Turn the focus ring to adjust the focus. sQuick Start Guide
Is the projector at the correct distance?Is it projecting outside of the recommended projection distance range?
Setup within the recommended range. sp.99
Is the Keystone adjustment value too large?Lower the projection angle to reduce the amount of keystone correction. sQuick Start Guide
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Epson eb g5100 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Epson eb g5100 in the language / languages: English as an attachment in your email.
The manual is 5,69 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
