500230
54
Zoom out
Zoom in
Previous page
1/158
Next page
Summary of correction procedure
When multiple projectors are set up and you need to make corrections, use
the following procedure to correct one projector at a time.
1. Set the projector ID and the remote control ID.
Set a projector ID for the target projector, then set the same ID for the
remote control, so that you can limit the operation to one target projector.
s "Setting the ID and Using the Remote Control" p.51
2. Correct the color difference.
You can carry out color correction when projecting from multiple projectors.
You can adjust from black to white in five stages called levels 1 to 5, and in
each of these 5 levels you can adjust the following two points.
Correcting brightness
You can correct the image brightness to make them all equal.
Correcting color
You can correct the image color so that they match closely.
Correcting
After setting up the projectors, correct the brightness and tone for each
projector to reduce the differences.
a
Press the [Menu] button.
s
"Using the Configuration Menu" p.62
b
Select Multi-screen from Extended.
c
Select the level to be corrected in Adjustment Level.
Each time a level is selected, the pattern of the level selected is
displayed.
You can start correcting from any level, usually you can make it
darker or lighter by correcting 1 to 5 or 5 to 1.
d
Correct the brightness with Brightness Correct.
When you select Level 5, all the images are adjusted to the
darkest image from multiple projectors.
When you select Level 1, all the images are adjusted to the
brightest image from multiple projectors.
When you select Level 2 to Level 4, all the images are adjusted to
the mid-range brightness image from multiple projectors.
Because each time the [Enter] button is pressed the image
displayed changes between the pattern display and the actual
image, you can check the correction results and make corrections
in the actual image.
e
Correct the Color Correct. (G/R) and Color Correct. (B/Y) settings.
f
Repeat procedures 3 to 5 until corrections are finished.
Projection Functions
54
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-D6250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-D6250 in the language / languages: English as an attachment in your email.

The manual is 7,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-D6250

Epson EB-D6250 User Manual - Dutch - 162 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info