537542
90
Zoom out
Zoom in
Previous page
1/149
Next page
Submenu Function
Projection
Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
Front
W
Front/Ceiling
RearWRear/Ceiling
s "Installation Methods" p.22
Operation
Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
Startup Source Search: Set to On to project images from
the port currently receiving an image when the projector
starts.
Submenu Function
A/V Settings
A/V Output: (This item can be set only if Standby Mode is
set to Communication On.)
When the projector is in standby status, set to Always On
in the following situations.
When outputting audio and images to external equipment.
When outputting audio from the microphone to the
projector's speaker.
a
The fan may rotate in standby status. Also,
when the projector wakes from standby
status, the fan may make a loud noise as it
rotates, but this is not a malfunction.
Audio Output: Select the audio output when projecting
images from the Computer1, Computer2, S-Video, or Video
input ports. When set to Auto, the audio from the audio
input port that matches each image input port is output. In
standby status, the audio from the last selected source is
output.
s "Connecting Equipment" p.26
HDMI Audio Output: Select the audio source when
projecting images from the HDMI input port. Select HDMI
to output the image's audio as it is.
Plug-in Power: When set to On, you can use a microphone
with Plug-in Power support.
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values for Display
*1
,
Operation
*2
, and A/V Settings
*3
from the Extended menu
to their default settings.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.101
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
List of Functions
90
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-98 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-98 in the language / languages: English as an attachment in your email.

The manual is 11,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info