737378
277
Zoom out
Zoom in
Previous page
1/312
Next page
Solving Interactive Features Problems
277
Check the solutions in these sections if you have problems using the
interactive features (EB735Fi/EB725Wi).
gg Related Links
• "Solutions When "Error Occurred in the Easy Interactive Function" Message
Appears" p.277
• "Solutions When the Interactive Pens do not Work" p.277
• "Solutions When You Cannot Operate a Computer from the Projected
Screen" p.278
• "Solutions When the Interactive Pen Position is not Accurate" p.278
• "Solutions When the Interactive Pens are Slow or Difficult to Use" p.278
• "Solutions When the Interactive Touch Operation does not Work" p.278
• "Solutions for Problems with Capturing, Printing, Saving, or Scanning"
p.279
• "Solutions When the Time is Incorrect in Whiteboard Settings" p.279
• "Solutions When Whiteboard Mode does not Start" p.280
Solutions When "Error Occurred in the Easy
Interactive Function" Message Appears
If the "Error occurred in the Easy Interactive Function" message appears,
contact Epson for help.
Solutions When the Interactive Pens do not Work
If the interactive pens do not work, try the following solutions:
• Make sure you are not covering the black section near the tip of the pen.
• Try holding the pen at a different angle so that your hand is not blocking
the signal.
• Press the button on the side of the pen to check the remaining battery
power. If the battery indicator does not turn on, replace the battery.
• Make sure the pen tip is securely attached to the pen.
• If the pen tip is worn out or damaged, you may need to replace it.
• Make sure nothing is blocking the signal between the pen and the
interactive pen receiver on the projector.
• Make sure the cable cover is in place to keep cables from blocking the
signal.
• Dim the room lights and turn off any fluorescent lights. Make sure the
projection surface and pen receiver are not in direct sunlight or other
sources of bright lighting.
• Make sure the interactive pen receiver on the projector is clean and free
from dust.
• Make sure there is no interference from infrared remote controls, mice, or
infrared microphones.
• Make sure you perform pen calibration when using the interactive pen for
the first time so that the projector recognizes the position of the pen
correctly. See your projector's Installation Guide for details.
• When using multiple projectors and interactive pens in the same room,
interference may cause pen operations to become unstable. Connect the
projectors using the optional remote control cable set and set the Sync of
Projectors setting to Wired.
s Pen/Touch > Installation of Projectors > Sync of Projectors
If you do not have a remote control cable set, set the Infrared Intensity
setting to Strong in the projector's Pen/Touch menu.
s Pen/Touch > Installation of Projectors > Infrared Intensity
• Try replacing the soft pen tip with the hard pen tip. Doing so may improve
pen operations because some of the projector models do not support the
soft pen tip.
gg Related Links
• "Replacing the Interactive Pen Tip" p.259
• "Using the Interactive Pens" p.96
• "Installing Batteries in the Pens" p.45
• "Getting the Latest Version of the Documents" p.10
• "Projector Pen And Touch Setup Settings - Pen/Touch Menu" p.237
277


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-735Fi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-735Fi in the language / languages: English as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-735Fi

Epson EB-735Fi User Manual - German - 325 pages

Epson EB-735Fi User Manual - Dutch - 324 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info