737382
261
Zoom out
Zoom in
Previous page
1/312
Next page
Updating the Firmware
261
When you select the Firmware Update option in the projector's Initial/All
Settings menu, the projector enters firmware update mode and is ready to
perform a firmware update using the USB-A or USB-B port.
gg Related Links
• "Updating Firmware Using a USB Storage Device" p.261
• "Updating Firmware Using a Computer and USB Cable" p.262
Updating Firmware Using a USB Storage Device
You can update the projector's firmware using a USB storage device.
a
Responsibility for updating the firmware lies with the customer. If a
firmware update fails due to problems such as a power failure or
communication problems, a fee will be charged for any necessary
repairs.
a
Download the projector firmware file from the Epson Web site.
b
Copy the downloaded firmware file to the root folder (highest folder in
the hierarchy) of the USB storage device.
a
The USB storage device must be formatted in FAT format.
Do not copy any other files to the USB storage device.
Do not change the firmware's file name. If the file name is
changed, the firmware update will not start.
Check that the firmware file you copied is the correct file for
your projector model. If the firmware file is not correct, the
firmware update will not start.
c
Connect the USB storage device to the projector's USB-A port.
a
Connect the USB storage device directly to the projector. If the
USB storage device is connected using a USB hub, the firmware
update may not be applied correctly.
d
Press the [Menu] button, select the Initial/All Settings menu, and press
[Enter].
e
Select Firmware Update and press [Enter].
f
Select Yes to start the firmware update.
a
Do not disconnect the power cord from the projector while the
firmware is updating. If the power cord is disconnected, the
projector may not start correctly.
Do not disconnect the USB storage device from the projector
while the firmware is updating. If the USB storage device is
disconnected, the update may not be applied correctly.
All of the projector's indicators start flashing and the firmware update
starts. When the update finishes normally, the projector enters standby
status (only the power indicator is lit blue). If Direct Power On is set to
On in the projector's Operation menu, the projector turns back on
again.
261


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-720 in the language / languages: English as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-720

Epson EB-720 User Manual - German - 325 pages

Epson EB-720 User Manual - Dutch - 324 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info