675181
230
Zoom out
Zoom in
Previous page
1/253
Next page
Solving Interactive Features Problems
230
• Make sure the projector is not too close to the projection surface.
• Move the projector or turn off the interfering device, such as a light source
that is emitting infrared rays.
Solutions When You Cannot Operate a Computer
from the Projected Screen
If you cannot operate a computer from the projected screen, try the following
solutions:
• Make sure the USB Type B option on the Extended menu is set to Easy
Interactive Function or USB Display/Easy Interactive Function.
• Make sure you perform pen calibration when using the interactive pen for
the first time so that the projector recognizes the position of the pen
correctly.
• Press the [Pen Mode] button on the remote control to select PC Interactive
as the Pen Mode setting. You can also select the Pen Mode setting from the
projector's Extended menu.
s Extended > Easy Interactive Function > Pen Mode
• Make sure the USB cable is securely connected. Disconnect the USB cable,
and then reconnect it.
• When projecting an image using two projectors installed side by side, you
need to select the Multi-Projection setting to use the interactive features.
You also need to install Easy Interactive Driver Ver. 4.0 from the Epson
Projector Software for Easy Interactive Function CD-ROM on the computer
that you want to operate from the projected screen.
s Extended > Easy Interactive Function > Advanced > Multi-Projection
• When projecting an image with only one of the two projectors installed side
by side, you may not be able to operate a computer from the projected
screen. Select the icon on the Home screen, and then set Use this
single projector to On.
gg Related Links
• "Pen Calibration" p.77
• "Projector Setup Settings - Extended Menu" p.178
Solutions When the Interactive Pen Position Is Not
Accurate
If the pen position is not the same as the mouse pointer, try the following
solutions:
• Make sure you perform pen calibration when using the interactive pen for
the first time so that the projector recognizes the position of the pen
correctly. If the cursor location and pen position do not match after auto
calibration, you can calibrate manually.
• Make sure the cable cover is in place to keep cables from blocking the
signal.
• Try adjusting the pen operation area.
• If you use the [E-Zoom] + button on the remote control to enlarge the
image, the pen position is not accurate. When you return the image to the
original size, the position should be correct.
• If you set Pen Mode to PC Interactive in the projector's Extended menu,
set Auto Adjust Pen Area to Off, and then select Manual Adj. Pen Area.
s Extended > Easy Interactive Function > General > Advanced > Auto
Adjust Pen Area
s Extended > Easy Interactive Function > General > Advanced >
Manual Adj. Pen Area
• Try changing the computer's resolution to 1280 × 800.
gg Related Links
• "Pen Calibration" p.77
• "Projector Setup Settings - Extended Menu" p.178
• "Adjusting the Pen Operation Area" p.93
230


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-680 in the language / languages: English as an attachment in your email.

The manual is 7,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-680

Epson EB-680 User Manual - German - 265 pages

Epson EB-680 User Manual - Dutch - 261 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info