Manual Epson EB-485Wi (page 17 of 36) (English)

500219

Zoom out

Zoom in

1/36

English

5. Installation Procedure

Make sure to follow the steps below to install the setting plate. If you ignore these steps, the setting plate

could fall and cause personal injury or property damage.

a Disassemble the parts

(1) Remove the wall plate from the setting plate.

• Remove the M6 x 20 mm hexagon shoulder bolt ( ).

• Remove the M6 x 20 mm cross recessed head shoulder screws (x3) with the No.3 cross-head

screwdriver ( ).

❏ When you mount the projector on the wall with the setting plate, the wall requires enough

strength to hold the projector and the setting plate.

This setting plate should be installed on a concrete wall. Confirm the weight of the

projector and the setting plate before installation, and maintain the strength of the wall. If

the wall is not strong enough, reinforce the wall before installation.

❏ The combined mass of the projector and the setting plate is 14.5 kg.

❏ Do not hang the rest of the cable over the setting plate.

❏ Install the setting plate so that it can sufficiently support the mass of the projector and

setting plate, and resist any horizontal vibration. Use M8 nuts and bolts. Nuts and bolts

smaller than M8 could cause the setting plate to fall.

❏ Epson accepts no responsibility for any damage or injury caused by lack of wall strength or

inadequate installation.

Warning

M6 x 20 mm cross

recessed head shoulder

screws (x3)

M6 x 20 mm hexagon

shoulder bolt

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-485Wi in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-485Wi

Epson EB-485Wi User Manual - English - 165 pages

Epson EB-485Wi User Manual - Dutch - 171 pages

Epson EB-485Wi User Manual - Spanish - 168 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Epson EB-485Wi Manual

Product: