216267
11
Zoom out
Zoom in
Previous page
1/21
Next page
11
English
(3) Make mounting holes in the wall in the required locations.
The wall plate needs to be secured by commercially available anchors or lag bolts in the following
places. It is recommended that the wall plate be secured in at least three places.
If securing the wall plate in four places, make the holes indicated by A or B in the figure.
If securing the wall plate in three places, make the holes indicated by C in the figure.
(4) Remove the template sheet.
(5) Mount the wall plate on the wall.
B Determine the projection distance and pull out the slider
(1) From the projection distance table, calculate the distance (a) from the projection surface to
the front of the projector.
(2) Loosen the four screws and pull out the slider on the mounting bracket.
Align the slider with the mark slider measure that is a distance (a+x) equivalent to the distance (a) plus
the thickness of the projection screen (x).
Four mounting holes
Three mounting holes
When you mount the projector on the wall with the mounting bracket, the wall needs to be
strong enough to hold the projector and the mounting bracket. Confirm the mass of the
projector and the mounting bracket before installation, and maintain the strength of the
wall. If the wall is not strong enough, reinforce the wall before installation.
Install the mounting bracket so that it can sufficiently support the mass of the projector
and mounting bracket, and resist any horizontal vibration. Use M8 nuts and bolts. Nuts
and bolts smaller than M8 could cause the mounting bracket to fall.
Epson takes no responsibility for any damage or injury caused by incorrect installation.
Warning
a+X
Screws (4 )
Slider measure
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson eb 440w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson eb 440w in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson eb 440w

Epson eb 440w User Manual - English - 153 pages

Epson eb 440w User Manual - Dutch - 158 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info