215177
31
Zoom out
Zoom in
Previous page
1/116
Next page
31
Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
When multiple projectors are lined up and projecting images, you can
correct the brightness and color tone of each projector's image with
multi-screen color adjustment so that the colors of images from each
projector match closely.
In some cases the brightness and color tone may not match
completely even after correction.
Summary of Correction Procedure
When multiple projectors are setup and you need to make corrections, use
the following procedure to correct one projector at a time.
1. Set the projector ID and the remote control ID
To limit operation to one target projector, set a Projector ID for the
target projector, and set the same ID for the remote control. s p.29
2. Correct the color difference
You can carry out color correction when projecting from multiple
projectors. You can adjust from black to white in five stages called
levels 1 to 5, and in each of these 5 levels you can adjust the following
two points.
Correcting brightness
You can correct the image brightness to make them all equal.
Correcting color
You can adjust the image color to make them match more closely by
using "Color Correct. (G/R)" and "Color Correct. (B/Y)".
Correction Method
After setting up the projectors, correct the brightness and tone for each
projector to reduce the differences.
A
Press the [Menu] button and select "Extended" -
"Multi-screen" from the configuration menu.
s "Using the Configuration Menu" p.38
B
Select the level to be corrected in "Adjustment
Level".
Each time a level is selected, the pattern of the level selected is
displayed.
You can start correcting from any level, usually you can make it
darker or lighter by correcting 1 to 5 or 5 to 1.
C
Correct the brightness with "Brightness Correct.".
When you select level 5, it adjusts to the darkest image from
multiple projectors.
When you select level 1, it adjusts to the brightest image from
multiple projectors.
When you select level 2 to 4, it adjusts to the mid-range
brightness image from multiple projectors.
Each time the [Enter] button is pressed the image displayed
changes between the pattern display and the actual image, and
you can check the correction results and make corrections in the
actual image.
Procedure
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson eb 1730w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson eb 1730w in the language / languages: English as an attachment in your email.

The manual is 6,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson eb 1730w

Epson eb 1730w User Manual - German - 118 pages

Epson eb 1730w User Manual - Dutch - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info