737384
41
Zoom out
Zoom in
Previous page
1/319
Next page
Projector Connections
41
Disconnecting a USB Device
When you have finished presenting with a connected USB device, disconnect
the device from the control pad or projector.
a
Turn off and unplug the device, if necessary.
b
Disconnect the USB device from the control pad or projector.
Connecting to a Document Camera
You can connect a document camera to your projector to project images
viewed by the camera.
The connection method varies depending on your Epson document camera
model. See the document camera manual for details.
Depending on your projector and document camera models, you can control
the document camera using the interactive features.
a
Select USB2 as the image source when you connect a USB document
camera to one of the USB-A ports.
You cannot use multiple USB document cameras at the same time.
gg Related Links
• "Controlling a Document Camera" p.125
• "Getting the Latest Version of the Documents" p.10
Connecting to an HDBaseT Transmitter
To send an HDMI or RS-232C signal over a long distance, you can connect
the projector to an optional HDBaseT transmitter using a 100Base-TX
network cable (EB805F/EB800F). This is useful when you want to send a
signal to or control the projector from a remote location, such as in a hall or
event site, since you can use a network cable up to 100 m in length. To ensure
proper data transmission, use a Category 5e STP cable or better. However,
operation is not guaranteed for all input/output devices and environments.
a
To enable communication from the Ethernet and serial ports on the
transmitter, set the Control Communications setting to On in the
projector's Signal I/O menu. Turning on this setting disables the
projector's LAN and RS-232C ports.
s Signal I/O > HDBaseT > Control Communications
If you connected an Extron XTP transmitter or switcher to the
projector's HDBaseT port, set the Extron XTP setting to On in the
projector's Signal I/O menu.
s Signal I/O > HDBaseT > Extron XTP
Wired remote control using the HDBaseT port is not available.
If you want to control the projector when the projector does not
project any images, set the A/V Output setting to Always On in the
projector's Signal I/O menu.
a
Turn off the projector and HDBaseT transmitter.
a
Make sure the projector and HDBaseT transmitter are turned off
when connecting or disconnecting a network cable between the
two devices.
b
Connect one end of the network cable to the HDBaseT port on the
transmitter.
c
Connect the other end to the projector's HDBaseT port.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-1480Fi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-1480Fi in the language / languages: English as an attachment in your email.

The manual is 8,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-1480Fi

Epson EB-1480Fi User Manual - German - 338 pages

Epson EB-1480Fi User Manual - Dutch - 336 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info