737384
31
Zoom out
Zoom in
Previous page
1/319
Next page
Projector Placement
31
Front Upside Down/Rear Upside Down (Vertically)
Select the correct Projection option in the projector's Installation menu
according to the installation method being used. If necessary, turn on the Inv
Direction Button setting in the projector's Operation menu and adjust the
Menu Rotation setting in the projector's Display menu.
a
The default Projection setting is Front/Upside Down.
You can change the Projection setting as follows by pressing down
the [A/V Mute] button on the remote control for about 5 seconds.
Switch Front to/from Front/Upside Down
Switch Rear to/from Rear/Upside Down
gg Related Links
• "Projection Modes" p.59
• "Changing the Projection Mode Using the Remote Control" p.59
• "Changing the Projection Mode Using the Menus" p.59
Settings when Using the Interactive Features
When using the interactive features, project from in front of the screen
(EB1485Fi/EB1480Fi).
Set Projection to Front/Upside Down or Front.
Attention
The interactive features are operated using infrared communication. Note the
following points when installing the projector.
Do not install the projector tilted at an angle of or more. The interactive
features may not operate correctly.
Make sure there is no strong light or sunlight shining on the interactive pen
receiver, the projection screen, the projector itself, or the rear of the projector.
Do not install the projector where it could be subjected to direct sunlight
through a window. This could cause the interactive features to malfunction.
Install the projector so that the interactive pen receiver is not too close to
fluorescent lights. If the surrounding area is too bright, the interactive features
may not operate correctly.
If there is any dust stuck to the interactive pen receiver, it could interfere with
infrared communication and the interactive features may not operate correctly.
Clean the receiver if it is dirty.
Do not put paint or any stickers on the cover of the interactive pen receiver.
When using the interactive features, do not use an infrared remote control or
microphone in the same room. The interactive pen could malfunction.
Do not use devices that generate powerful noise, such as rotary devices or
transformers, near the projector, as the interactive features may not operate
correctly.
a
We recommend using a smooth, board type screen without any
unevenness. If the projection screen is uneven, there may be
distortions in the projected image.
Distortions may occur in the projected image depending on the
material of the screen and the installation method.
When using the interactive features, install the projector so that the
projected screen is a rectangle without any distortion.
When using the interactive features in the same room as multiple
projectors, interactive pen operations may become unstable. In this
case, connect the optional remote control cable set to the projectors,
and change Sync of Projectors to Wired in the projector's
Pen/Touch menu.
s Pen/Touch > Installation of Projectors > Sync of Projectors
gg Related Links
• "Settings when Using the Touch Unit" p.32
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-1480Fi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-1480Fi in the language / languages: English as an attachment in your email.

The manual is 8,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-1480Fi

Epson EB-1480Fi User Manual - German - 338 pages

Epson EB-1480Fi User Manual - Dutch - 336 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info