19838
17
Zoom out
Zoom in
Previous page
1/31
Next page
Single Sheets with the Cut-Sheet Feeder (2/3)
EPSON DLQ-3500 Quick Guide
6. Insert the paper along the right paper
guide and adjust the position of the left
paper guide so that it matches your
papers width. Make sure the position of
the guide allows the paper to move up
and down freely. Then lock the left guide
in place.
Note:
Load paper with the printable side up. If you
are using pre-printed forms, load the forms
top-down.
7. Push back the paper set levers to clamp
the paper against the guide rollers.
8. Before printing, make sure that
Manual/CSF is selected as the paper
source on the control panel. If not, select
it by pressing the Paper Source button.
Also set the paper-thickness lever to the
appropriate position for the paper
loaded in the cut-sheet feeder as
described in “Paper-Thickness
Settings.” In your printer driver
software, select your paper size from the
Paper Size list.
The cut-sheet feeder feeds paper when
you send data to the printer. You can also
feed paper by pressing the Load/Eject
button.
Note:
If the platen turns without loading the paper,
completely remove the paper and then insert
it all the way into the printer again.
If you need to adjust the position of the paper
after it is loaded, see “Adjusting the
top-of-form position” and follow the
instructions.
Loading paper manually using the
front paper guide
The cut-sheet feeder’s single-sheet loading
feature allows you to switch to a different
type or size of paper without replacing the
paper already loaded in the cut-sheet feeder
or removing the feeder.
Follow these steps to load paper manually
using the paper guide:
1. Make sure that Manual/CSF is selected
as the paper source on the control panel.
If not, select it by pressing the Paper
Source button.
2. Push the paper guide and the paper
guide extension all the way in.
3. Adjust the edge guide so that it is aligned
with the guide mark on the paper guide.
4. While aligning the left side of paper with
the edge guide, insert it until it meets
resistance. Be sure to load paper
printable side up. After a few seconds,
the printer automatically advances the
paper to the loading position. The
printer is ready to accept data from your
computer and print.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson DLQ3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson DLQ3500 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson DLQ3500

Epson DLQ3500 User Manual - German - 37 pages

Epson DLQ3500 User Manual - French - 36 pages

Epson DLQ3500 User Manual - Italian - 36 pages

Epson DLQ3500 User Manual - Portuguese - 36 pages

Epson DLQ3500 User Manual - Spanish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info