617873
15
Zoom out
Zoom in
Previous page
1/217
Next page
AcuLaser M4000 Series User's Guide
Safety Instructions 15
When removing the imaging cartridge, do not expose it to sunlight at all and avoid exposing it
to room light for more than five minutes. The imaging cartridge contains a light-sensitive
drum. Exposure to light can damage the drum, causing dark or light areas to appear on the
printed page and reducing the service life of the drum. If you need to keep the imaging
cartridge out of the printer for long periods, cover it with an opaque cloth.
Be careful not to scratch the surface of the drum. When you remove the imaging cartridge from
the printer, always place it on a clean, smooth surface. Avoid touching the drum, since oil from
your skin can permanently damage its surface and affect print quality.
To get the best print quality, do not store the imaging cartridge in an area subject to direct
sunlight, dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.
Be sure to keep consumable components out of the reach of children.
Do not leave jammed paper inside the printer. This can cause the printer to overheat.
Avoid sharing outlets with other appliances.
Important Safety Instructions
Read all of the following instructions before operating your printer:
When choosing a place and power source for the printer
Place the printer near an electrical outlet where you can easily plug in and unplug the power
cord.
Do not place the printer on an unstable surface.
Do not put your printer where the cord will be stepped on.
Slots and openings in the cabinet and the back or bottom are provided for ventilation. Do not
block or cover them. Do not put the printer on a bed, sofa, rug, or other similar surface or in a
built-in installation unless proper ventilation is provided.
All interface connectors for this printer are Non-LPS (non-limited power source).
Connect all equipment to properly grounded power outlets. Avoid using outlets on the same
circuit as photocopiers or air control systems that regularly switch on and off.
Connect your printer to an electrical outlet that meets the power requirements of this printer.
Your printer’s power requirements are indicated on a label attached to the printer. If you are
not sure of the power supply specifications in your area, contact your local power company or
consult your dealer.
If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson AcuLaser M4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson AcuLaser M4000 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson AcuLaser M4000

Epson AcuLaser M4000 User Manual - German - 228 pages

Epson AcuLaser M4000 User Manual - Dutch - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info