709906
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
Alle teksten en afbeeldingen in deze handleiding zijn auteursrechtelijk beschermd en intellectueel eigendom van ENTRYA BVBA.
Tous les textes et images dans ce manuel sont protégés par le droit d’auteur et la propriété intellectuelle d’ENTRYA BVBA.
All texts and images in this manual are protected by copyright laws and intellectual property of ENTRYA BVBA.
Installation Warnings
Installatie
Installation
Installation
Only use the device in dry, closed spaces and not in locations that have explosion hazards.
Never install the device next to or above a heater.
The device may never be ush mounted without sucient ventilation, do not cover the openings
on the back of the device.
Do not install the device in direct sunlight.
Protect the device against vibrations and dropping.
Video and audio may be inuenced if the wiring is to close to an electromagnetic eld.
For example: microwave, TV, computer, ...
Device must be protected against moist, high temperatures, dust and acids.
1. Bevestig de bodemplaat met geschikte schroeven tegen de muur. Breng de kabel door de
kabeldoorvoer en sluit aan op de connector.
2. Haak het frontpaneel in de linkerzijde van de bodemplaat.
3. Draai het ingehaakt frontpaneel tot het klikt in de bodemplaat.
Ga verder met het instellen van het adres (p.11), instellen van de eindweerstand (p.12) en de
MASTER/SLAVE conguratie (p.12-13).
1. Fixez la plaque de fond avec les vis. Connectez le câble pour le BUS à le connecteur.
2. Accrochez le panneau avant dans le coté gauche de la plaque de fond.
3. Cliquez le panneau avant avec un mouvement de rotation dans la plaque de fond.
Continuez avec l’adressage (p.11), la résistance de terminaison (p.12) et la conguration MAÎTRE/
ESCLAVE (p.12-13).
1. Fix the bottom cover on the wall with screws. Connect the cable to the connector in the bottom
cover.
2. Hook the front cover in the left side of the bottom cover.
3. Turn the hooked front panel until it clicks into the bottom cover.
Continue with setting the address (p.11), the terminal switch (p.12) and the MASTER/SLAVE
conguration (p.12-13).
EN
NL
FR
EN
1 2 3
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrya Facila FP135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrya Facila FP135 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info