609404

Entrematic Ditec TOP903H - IP2179 Manual

27
Zoom out
Zoom in
Previous page
1/48
Next page
77
IP2179EN - 2015-11-24
TOP603H
16. Memorising / Deleting remote controls
16.1 Memorising remote controls via the control panel
16.2 Memorising remote controls from a distance
16.3 Deleting remote controls
1. Press the [7] and [5] keys simultaneously for about 1 s. The display flashes .
2. Press the required key on the remote control.
• The display indicates
for about 1 s, and the remote control is memorised.
• The function of the memorised key is OPEN-STOP-CLOSE-STOP.
NB: with automatic closure enabled (parameter b4), the function of the remote control is OPENING.
1. Press the PRG of a previously memorised GOL4 transmitter for 5 seconds
(within the range of the receiver) until the LED lights up.
2. Press any one of the CH keys of the new transmitter.
• The new transmitter can memorise the same keys as the existing trans-
mitter.
NB: be careful not to accidentally memorise your neighbours' transmitters.
1. Press the [7] and [5] buttons simultaneously for more than 6 seconds. The display flashes
, first slowly and then more quickly.
• All the remote controls are deleted.
PRG
17. Adjusting the parameters
1. Press the menu button [6] for more than 1.5 s. The display goes to the adjustments menu
or to the last parameter adjusted. The 2-character menu name flashes. For example A ... 0.
2. Select the required parameter using the [7] and/or [5] buttons.
3. Press the menu button [6] for less than 1.5 s. The display indicates the value of the selected
parameter. For example, 0.
4. Alter the value using the [7] and/or [5] buttons. The new value is automatically memorised.
5. Press the [6] button for less than 1.5 s. The display returns to the selected parameter.
• To quit the adjustment mode, press the [6] button for more than 1.5 s.
• The adjustment mode is automatically quit after 15 s of inactivity.
NB: while the adjustment mode is active, the automation cannot accept any commands.
WARNING: if the programming menu values from A0 to A4 are modified, the display visualises
L .. 4 and you must repeat the learning procedure (see chapter 15).
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec TOP903H - IP2179 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec TOP903H - IP2179 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec TOP903H - IP2179

Entrematic Ditec TOP903H - IP2179 User Manual - German - 48 pages

Entrematic Ditec TOP903H - IP2179 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info