609403

Entrematic Ditec TOP603H - IP2179 Manual

40
Zoom out
Zoom in
Previous page
1/48
Next page
90
IP2179EN - 2015-11-24
TOP903H
Menu Function, setting range, unit Value
Factory
settings
Auxiliary card
000 = without TOP905AC
001 = with TOP905AC
000 - 001
Relay 1 (with auxiliary card TOP905AC) if A9 = 1
000 = no function
001 = electric lock (activated for 1 s at each start)
002 = flashing light (activated when the motor is moving)
003 = photocell test (transmitter voltage interrupted)
004 = door OPEN (activated with door fully open)
005 = door CLOSED (activated with door fully closed)
006 = green light (activated with door fully open)
007 = red light (deactivated with door fully open)
000 - 007
Relay 2 (with auxiliary card TOP905AC) if A9 = 1
000 = no function
001 = electric lock (activated for 1 s at each start)
002 = flashing light (activated when the motor is moving)
003 = photocell test (transmitter voltage interrupted)
004 = door OPEN (activated with door fully open)
500 = door CLOSED (activated with door fully closed)
006 = green light (activated with door fully open)
007 = red light (deactivated with door fully open)
000 - 007
Closing edge protection (with auxiliary card TOP905AC)
000 = disabled
001 = optic edge FUTURE USE
002 = edge 8k2
000 - 001
Detection of stroke with little weight / friction
000 = door with little weight / low friction
001= door with standard weight / normal friction
000 - 001
Selection of automatic closure
000 = disabled
001 = 5 sec - 010 = 50 sec
011 = 1 min - 040 = 30 min
With automatic closure enabled, the OPEN/STOP/CLOSE/
STOP command becomes a simple OPENING command.
The enabling of automatic closure is visualised on the display
with
(3 points) flashing with the door open, or fixed
after a step-by-step STOP command.
The step-by-step STOP commands given when automatic clo-
sure is enabled are not permanent.
000 - 008
DO NOT USE
Maintenance alarm
000 = disabled
001..009 (1,000 door operations)
Example: 005 = 5,000 door operations
When the maintenance interval has expired, the courtesy light
flashes after every movement.
A new maintenance alarm setting will reset the counter.
000 - 009
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec TOP603H - IP2179 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec TOP603H - IP2179 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec TOP603H - IP2179

Entrematic Ditec TOP603H - IP2179 User Manual - German - 48 pages

Entrematic Ditec TOP603H - IP2179 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info