609403

Entrematic Ditec TOP603H - IP2179 Manual

26
Zoom out
Zoom in
Previous page
1/48
Next page
76
IP2179EN - 2015-11-24
TOP603H
15. Self-learning of the stroke TOP603H
WARNING: when an automation stroke self-learning operation is carried out, the obstacle detec-
tion device is not active.
NB: the self-learning operation can only be carried out during the initial installation or following
an automation RESET. Do not press any keys during this procedure.
1. Turn on the power supply.
• The display flashes L ... 4.
• Press and hold the
[7] button. The door will open.
• The display flashes L ... 4.
• Release the button when the required opening position is reached.
• Use the [7] and [5] buttons to correct the position if necessary.
• The courtesy light flashes 4 times during the operation L ... 4.
2. Press the [6] button. The display flashes L ... 3.
• The automation memorises the opening position and begins a closing operation.
• The courtesy light flashes 3 times.
• When the door reaches the closed position, the display flashes L ... 2. The courtesy light
flashes twice.
• The automation opens automatically as far as the open position. The display flashes
• L ... 1. The courtesy light flashes once.
• The automation automatically recloses as far as the closed position, the display visualises
C
and the door re-opens. The lamp does not flash.
3. The self-learning procedure is complete when the door is open and the courtesy light is ON.
NB: in certain cases, especially when the door moves very smoothly or the traction unit is not
connected to the door, the automatic stroke self-learning procedure may fail. This brings the
procedure back to the initial display condition L ... 4.
In this situation, you must modify parameter b3 = 0 (see ch. 17-18) to guarantee the correct
memorisation of the stroke.
Self-learning of the stroke with a remote transmitter
When the automation is delivered or reset, the remote transmitter assumes the following func-
tions:
• (1) has the same function as (UP arrow)
• (3) has the same function as (DOWN arrow)
• (2) or (4) has the same function as (confirm/memorisation)
For the self-learning of the stroke, refer to the procedure explained above.
Once the self-learning phase is complete, key [1] is used to command the door. The other keys can
be used to command other similar automations or other radio receivers.
1 2
3 4
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec TOP603H - IP2179 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec TOP603H - IP2179 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec TOP603H - IP2179

Entrematic Ditec TOP603H - IP2179 User Manual - German - 48 pages

Entrematic Ditec TOP603H - IP2179 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info