Manual Entrematic Ditec NeoS - IP2160 (page 5 of 24) (English)

609378

Zoom out

Zoom in

1/24

IP2160EN - 2015-05-08

2. Declaration of incorporation of partly com-

pleted machinery

2.1 Machinery Directive

(Directive 2006/42/EC, Annex II-B)

The manufacturer Entrematic Group AB, with headquarters in Lodjursgatan 10, SE-261 44 Land-

skrona, Sweden, declares that the automation for Ditec sliding gates NES300EH, NES300EHP,

NES400EH, NES400EHP, NES600EH, NES600EHP, NES1000EHP:

- is designed to be installed on a manual gate to form a machine pursuant to Directive 2006/42/

EC. The manufacturer of the motorised gate must declare conformity with Directive 2006/42/

EC (annex II-A) prior to initial machine start-up;

- conforms to the applicable essential safety requirements indicated in ANNEX I, Chapter 1 of the

Directive 2006/42/EC;

- conforms to the Low Voltage Directive 2006/95/EC;

- conforms to the Electromagnetic Compatibility Directive 2004/108/EC:

- conforms to the R&TTE Directive 1999/5/EC;

- the technical documentation conforms to Annex VII-B of the Directive 2006/42/EC;

- the technical documentation is managed by Marco Pietro Zini with headquarters in Via Mons.

Banﬁ, 3 - 21042 Caronno Pertusella (VA) - ITALY;

- a copy of technical documentation will be provided to national competent authorities, following

a suitably justiﬁed request.

Landskr ona, 01-07-2014 Marco Pietro Zini

(Chairman)

Pursuant to Machinery Directive (2006/42/EC) the installer who motorises a door or gate has the

same obligations as the manufacturer of machinery and as such must:

- prepare the technical data sheet which must contain the documents indicated in Annex V of the

Machinery Directive;

(The technical data sheet must be kept and placed at the disposal of competent national authori-

ties for at least ten years from the date of manufacture of the motorised door);

- draw up the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Direc-

tive and deliver it to the customer;

- afﬁx the EC marking on the motorised door or gate, in accordance with point 1.7.3 of Annex I of

the Machinery Directive;

- ensure compliance of the motorised door or gate with safety regulations, by installing the neces-

sary safety devices;

- carry out the safety test , modifying parameters and (if used) from the menu;

- refer to the installation manual of the CS12E - CS12M control panel for the operating force

adjustments, in compliance with EN12453 and EN12445.

made available to the user.

Only lock and release the door wings when the motor is switched off.

Do not enter within the operating range of the wing.

To dispose of electrical and electronic equipment correctly, users

must take the product to special "recycling centres" provided by

the municipal authorities.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec NeoS - IP2160 in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec NeoS - IP2160

Entrematic Ditec NeoS - IP2160 User Manual - German - 24 pages

Entrematic Ditec NeoS - IP2160 User Manual - French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Entrematic Ditec NeoS - IP2160 Manual

Product: