749195
43
Zoom out
Zoom in
Previous page
1/48
Next page
43
IP2288EN
EN
16.3 Visualisation of alarms and faults
i
WARNING: the visualisation of alarms and faults is possible with any visualisation selection.
The signalling of alarm messages takes priority over all other displays.
Type of
alarm Display Description Operation
Mechanical alarm
M3 - Automation blocked Check the mechanical parts.
M4 - Motor short circuit Check connection of motor.
M8 - Stroke too long Check the rack / chain belt
M8 - Stroke too short Manually check that the gate moves free-
ly.
MB - Absence of motor during an opera-
tion.
Check connection of motor.
MD - Irregular operation of the opening
limit switch
If the limit switch is configured but can't be
found, each stop (from the OB deceleration
start point) is seen as an obstacle and indi-
cated with MD.
Check connection of the opening limit
switch.
ME - Irregular operation of the closure
limit switch
If the limit switch is configured but can't be
found, each stop (from the CB deceleration
start point) is seen as an obstacle and in-
dicated with ME.
Check connection of the closure limit
switch.
MI - Detection of fifth consecutive obstacle. Check for the presence of permanent ob-
stacles along the stroke of the automation.
ML - Inverted limit switches Check the positioning and connection of the
limit switches. Also check the motor con-
nection.
OD - Obstacle during opening Check for the presence of obstacles along
the automation stroke.
OE - Obstacle during closure Check for the presence of obstacles along
the automation stroke.
OF - Automation blocked on opening Check the mechanical parts and make sure
there are no obstacles along the automa-
tion stroke.
OG - Automation blocked on closure Check the mechanical parts and make sure
there are no obstacles along the automa-
tion stroke.
Power
supply
Settings
S6 - Incorrect setting of safety device test Check the configuration of parameters
, , .
If , and cannot be or
.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec ION6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec ION6 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info