609375
10
Zoom out
Zoom in
Previous page
1/56
Next page
68
IP2163EN - 2014-08-05
Output
Value
Accessories
Description
AUX
SOFA1-SOFA2
GOPAV
LAN4S
LAB9
The control panel has a housing for plug-in control and safe-
ty cards.
The action of the control card can be selected by selecting
.
WARNING: the plug-in cards must be inserted and removed
with the power supply disconnected.
RDX
GOLR
GOL868R
The control panel is fitted with a housing for a plug-in card such
as a GOLR-GOL868R radio receiver.
Operating of the plug-in card is selected by selecting
.
WARNING: the plug-in cards must be inserted and removed with
the power supply disconnected.
Mains power supply, motor, release microswitch and automa-
tion wiring connection (factory settings)
Micro -B plug
The control panel has a USB input for connecting a USB
memory stick to update the FW or download diagnostic data
from the control panel by way of a Standard -A receptacle to
Micro -A plug cable (not supplied).
It can also be connected to a PC for AMIGO software man-
agement by way of a USB Standard-A plug to Micro -B plug
cable.
WARNING: only disconnect the cable from
the USB input when you have disconnected
the peripheral device on the Windows appli-
cation bar.
COM
BIXMR2
COM - This allows the functioning configurations to be saved
using the function
.
The saved configurations can be recalled using the function
.
COM - The storage module allows the remote controls to be
stored. If the control panel is replaced, the storage module being
used can be inserted in the new control panel.
WARNING: the storage module must be inserted and re-
moved with the power supply disconnected.
DIA
DIA - Connection of automation diagnostic LED.
OFF No power supply.
1 flash
every 5s
Mains power supply present, but gate
stopped waiting for commands. Any ex-
ternal faults are not detected by the diag-
nostic LEDs.
flashing
in sync with
LAMPH
Mains power supply present, normal op-
eration. flashing LED in sync with output
+LP- (LAMPH)
1 flash
every 10s
No mains power supply, battery-powered
operation.
steady on Request for maintenance (V0 alarm)
steady on Release door open.
1 flash
every 1s
Permanent alarm (see ALARMS and/or
TROUBLESHOOTING)
i
For more information, refer to kit NES100U-
SB manual.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec CS12M - IP2163 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec CS12M - IP2163 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec CS12M - IP2163

Entrematic Ditec CS12M - IP2163 User Manual - German - 56 pages

Entrematic Ditec CS12M - IP2163 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info