609373

Entrematic Ditec CROSS - IP1747 Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
4
IP1747EN 2011-09-07
2. DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
(Directive 2006/42/EC, Annex II-B)
The manufacturer DITEC S.p.A. with headquarters in Via Mons. Ban, 3 - 21042 Caronno Pertusella (VA) -
ITALY declares that the automation system for CROSS5-CROSS7-CROSS8 sliding gates:
- has been constructed to be installed on a manual gate to construct a machine pursuant to the Directive
2006/42/EC. The manufacturer of the motorized gate shall declare conformity pursuant to the Directive
2006/42/EC (annex II-A), prior to the machine being put into service;
- conforms to applicable essential safety requirements indicated in annex I, chapter 1 of the Directive
2006/42/EC;
- conforms to the Low Voltage Directive 2006/95/EC;
- conforms to the Electromagnetic Compatibility Directive 2004/108/EC;
- technical documentation conforms to annex VII-B to the Directive 2006/42/EC;
- the technical le is managed by Renato Calza with ofces in Via Mons. Ban, 3 - 21042 Caronno Pertu-
sella (VA) - ITALY;
- a copy of technical documentation will be provided to national competent authorities, following a suitably
justied request.
Caronno Pertusella, 17-09-2010 Silvano Angaroni
(Managing Director)
Si
S
lv
ano
An
AnAn
An
An
A
A
A
A
A
A
A
A
An
n
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
ga
g
ro
ro
ro
ro
ro
ni
(M
(M
(M
(M
(M
M
(M
(M
(M
M
(M
(M
M
M
M
M
(M
(M
M
(M
M
M
M
M
(M
M
M
M
M
M
M
M
M
M
M
M
M
M
(
(
M
M
M
(
(
M
M
M
(M
M
M
M
M
M
M
M
M
M
M
M
M
an
an
an
an
an
an
a
a
a
an
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
ag
ag
ag
ag
g
g
in
n
n
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
g
DiDi
Di
Di
Di
Di
Di
D
D
i
D
D
D
re
re
re
re
re
re
re
re
re
re
r
r
r
r
r
r
r
r
r
re
e
e
e
e
e
e
ct
c
ct
ct
ct
ct
c
c
ct
ct
c
c
ororor
or
or
or
r
or
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
2.1 Machinery Directive
Pursuant to Machinery Directive (2006/42/CE) the installer who motorises a door or gate has the same obliga-
tions as the manufacturer of machinery and as such must:
- prepare the technical le which must contain the documents indicated in Annex V of the Machinery Directive;
(The technical le must be kept and placed at the disposal of competent national authorities for at least
ten years from the date of manufacture of the motorized gate);
- draft the EC declaration of conformity in accordance with Annex II-A of the Machinery Directive and deliver
it to the customer;
- afx the CE marking on the power operated gate in accordance with point 1.7.3 of Annex I of the Machinery
Directive.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec CROSS - IP1747 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec CROSS - IP1747 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec CROSS - IP1747

Entrematic Ditec CROSS - IP1747 User Manual - German - 20 pages

Entrematic Ditec CROSS - IP1747 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info