775280
26
Zoom out
Zoom in
Previous page
1/62
Next page
25
EN
Insert back the tank (Fig. 7). Press firmly until the tank is completely inserted, until it clicks, con-
firming the correct installation.
Warning!
NEVER exceed the MAX mark when filling the tank.
Do not pour vinegar, descalers or other scented substances into the tank: Otherwise, the war-
ranty may be revoked.
If it proves necessary to add water while ironing, always turn off the iron and unplug the power
cord before filling the tank with water.
Switching on the appliance
Before you turn on the appliance, make sure there is sufficient water inside the tank. Totally
unwind the power cord.
Insert the plug into a power outlet. Turn the control knob (I) to the desired temperature (Fig. 8).
The temperature control lamp (K) turns on.
When the iron reaches the selected temperature, the lamp (K) turns off (the temperature lamp
turns off and on while ironing, indicating that the iron is maintaining the right temperature).
Push the steam button (H) and keep it pressed for 30 seconds or until the iron doesn't dispense
steam (only the first time you use it). This is necessary for the iron to produce and dispense
steam.
Note
When first used, the iron may give out a little smoke: This transitory effect is perfectly
normal and will disappear very soon. On first use of the iron, try it on an old piece of cloth
to remove any manufacturing residues.
Warning!
Do not release steam when the iron is standing on its grille rest (G).
The iron is fed automatically by means of a pump that at each filling is activated for a few se-
conds by generating a normal operation sound (vibration). Immediately after the vibration, a
decrease of the steam emission could occur. This is perfectly normal, and a after a few seconds
the steam output will be normal again.
If the iron is left inactive for a long time, before ironing it is recommended to hold it level and
deliver a few shots of steam into the ground to stabilize the jet and eliminate any condensation.
Fig. 7 Fig. 9Fig. 8
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enkho 148509.01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enkho 148509.01 in the language / languages: English, Italian as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info