Manual Engenius Network Management Software (page 37 of 51) (English)

619954

Zoom out

Zoom in

1/51

3.7. Block Node

By using the Block List, administrator can define some unwanted node unit to be

filtered by the discovery loop. The Block List can be launched by select the

SETTINGS button at the top and choose the Block List tab.

At the block list, as illustrated by the following figure, is separated to two lists.

The IP list at the left side shows the active units that discovered by the NMS,

whereas the list at the right side is the units to be blocked. When user would like

to block, select the node at the Allowed List and click the

right arrow

button to move the selected unit to the Blocked List. Similarly, if you would like

to remove a unit from the Blocked List, click the

left arrow button to

move the selected unit back to the Allowed List. The

and

buttons work identically with the left and right button except they move all the

nodes vice-versa.

Select the Save button to apply the change.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Engenius Network Management Software in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Engenius Network Management Software Manual

Product: