Manual Engenius Network Management Software (page 20 of 51) (English)

619954

Zoom out

Zoom in

1/51

The scanning process would begin to search for the active node unit. The

responding unit will be added to the UNPLACED APs area initially. User can then

drag and drop these unplaced units to the map with the appropriate

background map loaded. The discovery process would run recursively by the

interval set at the top right corner of the map. User can select the desired refresh

interval by selecting from the drop down list.

If you wish to stop the discovery process, click the Stop button at the top of the

map and the discovery loop will be stopped.

As stated earlier, the discovery packet is send by broadcasting the SNMP packet,

so user may need to change the SNMP v2c community if the nodes community

is different from the default value “public”.

Click the SETTINGS button at the top of the NMS. The setting window would

appear. Switch to Scan tab and enter the new SNMP community then hit the

Change button. Restart the discovery scan at the map and the changes will be

applied.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Engenius Network Management Software in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Engenius Network Management Software Manual

Product: