619963

Engenius ezMaster Manual

56
Zoom out
Zoom in
Previous page
1/60
Next page
56 / 60
the wireless clients associated with it. Both the Access Point and the wireless client must use the same
WEP key for data encryption and decryption.
o Mode: Select Open System or Shared Key.
o WEP Key: Select the WEP Key you wish to use.
o Input Type: ASCII: Regular Text or HEX. Select the key type. Your available options are ASCII
and HEX.
ASCII Key: You can choose upper and lower case alphanumeric characters and
special symbols such as @ and #.
HEX Key: You can choose to use digits from 0~9 and letters from A~F. Select the bit-
length of the encryption key to be used in the WEP connection. Your available options
are: 64, 128, and 152-bit password lengths.
o Key Length: Select the desired option and ensure the wireless clients use the same setting.
Your choices are: 64, 128, and 152-bit password lengths.
o Key1/2/3/4: Enter the Key value or values you wish to use.
WPA / WPA2 Enterprise: WPA and WPA2 are Wi-Fi Alliance IEEE 802.11i standards, which include
AES and TKIP mechanisms.
o Type: Select the WPA type to use. Available options are Mixed, WPA and WPA2. Choose
Mixed if your network has a mixture of older clients that only support WPA and TKIP, and
newer client devices that support WPA2 and AES.
o Encryption: Select the WPA encryption type you would like. Your available options are: Both,
TKIP(Temporal Key Integrity Protocol) and AES(Advanced Encryption Standard).
Note: Since TKIP is not permitted for 802.11n-based transmissions, setting the encryption
algorithm to TKIP when you are using an 802.11n or 802.11ac AP will cause the network to
operate in 802.11g mode.
o RADIUS Server: Enter the IP address of the RADIUS server.
o RADIUS Port: Enter the port number used for connections to the RADIUS server.
o RADIUS Secret: Enter the secret required to connect to the Radius server.
o Update Interval: Specify how often, in seconds, the group key changes. Select 0 to disable.
o RADIUS Accounting: Enables or disables the accounting feature.
o RADIUS Accounting Server: Enter the IP address of the RADIUS accounting server.
o RADIUS Accounting Port: Enter the port number used for connections to the RADIUS
accounting server.
o RADIUS Accounting Secret: Enter the secret required to connect to the RADIUS accounting
server.
o Accounting Group Key Update Interval: Specify how often, in seconds, the accounting data
sends. The range is from 60~600 seconds.
WPA-PSK / WPA2-PSK: WPA with PSK (Pre-shared key / Personal mode), designed for home and
small office networks that don't require the complexity of an 802.1X authentication server.
o Type: Select the WPA-PSK type to use. Available options are Mixed, WPA-PSK and WPA2-
PSK. Choose Mixed if your network has a mixture of older clients that only support WPA and
TKIP, and newer client devices that support WPA2 and AES.
o Encryption: Select the WPA encryption type you would like. Your available options are: Both,
TKIP(Temporal Key Integrity Protocol) and AES(Advanced Encryption Standard).
Note: Since TKIP is not permitted for 802.11n-based transmissions, setting the encryption
algorithm to TKIP when you are using an 802.11n or 802.11ac AP will cause the network to
operate in 802.11g mode.
o WPA Passphrase: Enter the Passphrase you wish to use. If you are using the ASCII format,
the Key must be between 8~64 characters in length.
o Group Key Update Interval: Specify how often, in seconds, the Group Key changes.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius ezMaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius ezMaster in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info