619963
37
Zoom out
Zoom in
Previous page
1/60
Next page
37 / 60
Monitoring
Active Clients
From here, you can view information, temporarily disconnect and permanently block the wireless clients
that are associated with the managed Access Points. ezMaster is able to identify client devices by their
Operating System, device type and host name, if available. If there are multiple Access Points in your
project, use the search bar to find an Access Point by its name.
Kick Client
Use this function to temporarily disconnect a wireless client from the network. The disconnected client can
simply reconnect manually if they wish to.
Ban Client
Use this function to permanently block a wireless client from the network. Go to Device Management >
Access Control to unblock the wireless client.
Search Bar
Use the Search Bar to search for connected wireless clients using the following criteria: Client Name, Client
IP, Client MAC Address, Client OS, AP Device Name, AP MAC Address, Model Name, SSID, Band.
Client Name
Displays the name of the wireless client connected to the Access Point.
Client IP
Displays the IP address of the wireless client connected to the Access Point.
Client MAC
Displays the MAC address of the wireless client connected to the Access Point.
Client OS
Displays the type of operating system the wireless client connected to the Access
Point is running on.
AP Device Name
Displays the name of the Access Point which the client is connected to.
BSSID
Displays the BSSID of the Access Point which the client is connected to.
Model Name
Displays the model name of the Access Point which the client is connected to
SSID
Displays the SSID of the Access Point which the client is connected to.
AP MAC
Displays the MAC address of the Access Point which the client is connected to.
Band
Displays whether the wireless client is connected to the 2.4GHz or 5GHz radio.
TX Traffic (KB)
Displays the total traffic transmitted to the Wireless Client.
RX Traffic (KB)
Displays the total traffic received from the Wireless Client.
RSSI (dBm)
Displays the received signal strength indicator in terms of dBm.
Column Filter
Shows or hides fields in the Active Clients list.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius ezMaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius ezMaster in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info