619966

Engenius EWS7952FP Manual

17
Zoom out
Zoom in
Previous page
1/207
Next page
17
Discovery on a Network without a DHCP Server
This section describes how to set up the Switch in a network
without a DHCP server. If your network has no DHCP service,
you must assign a static IP address to your Switch in order
to log in to the web-based Switch management.
1. Connect the supplied Power Cord to the Switch
andand plug the other end into an electrical outlet.
Verify the Power LED indicator is lit on the Switch.
2. Wait for the Switch to complete booting up. It might take
a minute or so for the Switch to completely boot up.
3. Connect one end of a Category 5/6 Ethernet cable into
the Gigabit (10/100/1000) Ethernet port on the Switch
front panel and the other end to Ethernet port on the
computer. Verify that the LED on Ethernet ports of the
Switch are green.
4. Once your computer is on, ensure that your TCP/IP is
set to On or Enabled. Open Network Connections
and then click Local Area Connecton. Select Internet
Protocol Version 4 (TCP/IPv4).
5. If your computer is already on a network, ensure that
you have set it to a Static IP Address on the Interface
(Example:192.168.0.10andtheSubnetmaskaddress
as 255.255.255.0).
6. Open a web browser on your computer. In the address
bar of the web browser, enter 192.168.0.239 and click
Enter.
7. A login screen will appear. By default, the username
is admin and the password is password. Enter the current
paspassword of the Switch and then click Login.
To make access to the web-based management
interface more secure, it’s highly reccomended that
you change the password to something more unique.
8. Once logged in, click IP Settings under the System
menu and select Static IPtoconguretheIPsettings
of the management interface.
9. Enter the IP address, Subnet mask, and Gateway.
10. Click Apply to update the system.
Use this procedure to access the management interface
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EWS7952FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EWS7952FP in the language / languages: English as an attachment in your email.

The manual is 11,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EWS7952FP

Engenius EWS7952FP Installation Guide - English - 3 pages

Engenius EWS7952FP Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info