619964
96
Zoom out
Zoom in
Previous page
1/207
Next page
96
Enter the information to set up CIST for the Switch:
Priority:
Select from the list to specify the priority
of the Switch for comparison in the CIST.
CIST priority is an important criterion on
determining the root bridge. In the same
condition, the Switch with the highest
priority will be chosen as the root bridge. A
lower value has a higher priority. The default
value is: 32768 and should be an exact
divisorof4096.
Maximum Hop:
Used to set the number of hops between
devices in a spanning tree region before the
BPDU packet sent by the Switch is discarded.
Each Switch on the hop count will reduce
the hop count by one until the value reaches
zero. The Switch will then discard the BDPU
packet and the information held for the port
will age out. The user may set a hop count
from 6 to 40. The default value is: 20.
Forward Delay:
Enter the bridge forward delay time, which
indicates the amount of time in seconds that
a bridge remains in a listening and learning
state before forwarding packets. The value
must be greater or equal to (Bridge Max
Age/2) + 1. The time range is from 4 seconds
to 30 seconds. The default value is 15
seconds.
Maximum Age:
The Max Age may be set to ensure that old
information does not endlessly circulate
through redundant paths in the network,
preventing the effective propagation of new
information. Set by the Root Bridge, this
value will aid in determining that the Switch
hasspanningtreecongurationvalues
consistent with other devices on the bridged
LAN. The user may choose a time between
6 and 40 seconds. The default value is: 20
seconds
TX Hold Count:
Enter the maximum number of Hello packets
transmitted per interval. The count can be
speciedfrom1to10.Thedefaultis:6.
Hello Time:
Enter the Switch’s Hello Time. This is the
interval between two transmissions of BPDU
packets sent by the Root Bridge to verify
that it is the Root Bridge. The Hello Time
range is from 1 to 10 seconds. The default
Hello Time is: 2 seconds.
Apply: Click APPLY to update the the system settings.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EWS5912FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EWS5912FP in the language / languages: English as an attachment in your email.

The manual is 11,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EWS5912FP

Engenius EWS5912FP Installation Guide - English - 3 pages

Engenius EWS5912FP Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info