619964

Engenius EWS5912FP Manual

93
Zoom out
Zoom in
Previous page
1/207
Next page
93
Port Settings
STP and RSTP help guard against the formation of loops
in an Ethernet network topology. A loop occurs when
nodes transmit packets to each other over more than
one data path. Packets can become caught in repetitious
cycles that needlessly consume network bandwidth
whichthensignicantlyreducenetworkperformance.
With STP, you can set it up on a port per port basis
totofurtherhelpcongureyournetworktopology.
The Switch allows each port to have its own spanning
tree,andsowillrequiresomeofitsownconguration
settings.
Port:
The port or trunked ports you wish to
congure.
External Path
Cost:
Thisdenesametricthatindicatesthe
relative cost of forwarding packets to
thespeciedportlist.Theportcostcan
be set automatically or as a metric value.
The default value is 0 (auto). Setting 0
for the external cost will automatically
set the speed for forwarding packets to
thespeciedport(s)inthelistforoptimal
efciency.Thedefaultportcostfora
100Mbps port is 200000 and the default
port cost for a Gigabit port is 20000. Enter
a value between 1 and 200000,000 to
determine the External Cost. The lower
the number, the greater the probability the
port will be chosen to forward packets.
Edge Port: Indicate whether the port is Enabled or
Disabled.
•Yes – Designates the port as an edge port.
• No – There is no edge port status.
P2P MAC:
A P2P port must operate in full duplex. Like
edge ports, P2P ports transition to a forwarding
staterapidly,thusbenetingfromRSTP.Enable
P2P for the device to establish a point-to-point
link, or specify for the device to automatically
establish a point-to-point link. Select Yes or No
from the list for point-to-point(P2P) .
• Yes – Restricted in that a P2P port must
operate in full-duplex.
• No –There is no P2P port status.
Migration
Start:
When operating in RSTP mode, enable this
function to force the port to use the new MST/
RST BPDUs and restart the migration delay
timer.
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EWS5912FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EWS5912FP in the language / languages: English as an attachment in your email.

The manual is 11,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EWS5912FP

Engenius EWS5912FP Installation Guide - English - 3 pages

Engenius EWS5912FP Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info