619964

Engenius EWS5912FP Manual

69
Zoom out
Zoom in
Previous page
1/207
Next page
69
Dynamic IP Address (DHCP):
EnablestheIPaddresstobecongured
automatically by the DHCP server.
Select this option if you have a DHCP
server that can assign the Switch an IP
address, subnet mask, default gateway
IP address, and a domain name server
IP address automatically. Selecting this
eld disables the IP Address, Subnet
mask,andGatewayelds.
Static IP Address:
Allows the entry of an IP address,
subnet mask, and a default gateway
for the Switch. Select this option if
you don’t have a DHCP server or if
you wish to assign a static IP address
to the Switch.
IP Address:
This eld allows the entry of an
IPv4 address to be assigned to this
IP interface. Enter the IP address
of your Switch in dotted decimal
notation. The factory default value
is: 192.168.0.239.
Subnet Mask:
A Bitmask that determines the
extent of the subnet that the Switch
is on. This should be labeled in the
form: xxx.xxx.xxx.xxx, where each
xxx is a number (represented in
decimals) between 0 and 255. The
value should be 255.0.0.0 for a Class
A network, 255.255.0.0 for a Class
B network, and 255.255.255.0 for a
Class C network, but custom subnet
masks are allowed. Enter the IP
subnet mask of your Switch in dotted
decimal notation. The factory default
value is: 255.255.255.0.
Gateway:
Enter an IP address that determines
where packets with a destination
address outside the current subnet
should be sent. This is usually the
address of a router or a host acting
as an IP gateway. If your network
is not part of an Intranet, or you do
not want the Switch to be accessible
outside your local network, you can
leavethiseldblank.
DNS Server (Domain Name
System):
Used for mapping a domain name
to its corresponding IP address and
vice versa. Enter a DNS IP address
in order to be able to use a domain
name to access the Switch instead
of using an IP address.
Apply: Click APPLY to update the the system settings.
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EWS5912FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EWS5912FP in the language / languages: English as an attachment in your email.

The manual is 11,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EWS5912FP

Engenius EWS5912FP Installation Guide - English - 3 pages

Engenius EWS5912FP Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info