619964

Engenius EWS5912FP Manual

30
Zoom out
Zoom in
Previous page
1/207
Next page
30
Wireless Mode:
Select from the drop-down menu to set
the wireless mode for the Access Point.
For 2.4 GHz, the available options are
802.11b/g/n mixed, 802.11b, 802.11b/g
mixed, 802.11g, and 802.11n. For 5
GHz, the available options are 802.11a/n
mixed, 802.11a, and 802.11n.
Channel HT Mode:
Use the drop-down menu to select the
Channel HT as 20 MHz, 20/40 MHz or
40 MHz. A wider channel improves the
performance, but some legacy devices
operate only on either 20MHz or 40 MHz.
This option is only available for 802.11n
modes.
Extension Channel:
Use the drop-down menu to select the
Extension Channel as the Upper or Lower
channel. An extension channel is a sec-
ondary channel used to bond with the
primary channel to increase the range to
40MHz, allowing for greater bandwidth.
This option is only available when Wire-
less Mode is 802.11n and Channel HT
Mode is 20/40 MHz or 40 MHz.
Channel:
Use the drop-down menu to select the
wireless channel the radio will operate
on. Optimizing channel assignments
reduces channel interference and channel
utilization for the network, thereby im-
proving overall network performance and
increasing the network’s client capacity.
The list of available channels that can be
assigned to radios is determined based
on which country the Access Points are
deployed in.
Transmit Power:
Use the drop-down menu to select the
transmit power for the radio. Increasing
the power improves performance, but if
two or more Access Points are operating
in the same area on the same channel, it
may cause interference.
Client Limit:
Please specify the maximum number of
wireless clients that can associate with
the radio. Enter a range between 1~127,
orllin0foranunlimitedclientlimit.
Data Rate:
Use the drop-down list to set the avail-
able data rates permitted for the wire-
less clients. The data rate will affect
the throughput of the Access Point(s).
The lower the data rate, the lower the
throughput, but the longer the transmis-
sion distance.
RTS/CTS Threshold:
Enter a Request to Send (RTS) Threshold
value between 1~2346. Use RTS/CTS to
reduce data collisions on the wireless net-
work if you have wireless clients that are
associated with the same Access Point.
Changing the RTS threshold can help con-
troltrafcowthroughtheAccessPoint.
If you specify a lower threshold value,
RTS packets will be sent more frequently.
This will consume more bandwidth and re-
duce the throughput of the Access Point.
Sending out more RTS packets can help
the network recover from interference
or collisions which might occur on a busy
network or on a network experiencing
electromagnetic interference.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EWS5912FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EWS5912FP in the language / languages: English as an attachment in your email.

The manual is 11,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EWS5912FP

Engenius EWS5912FP Installation Guide - English - 3 pages

Engenius EWS5912FP Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info