620037
121
Zoom out
Zoom in
Previous page
1/134
Next page
121
Routing Setup
Typically static routing does not need to be setup because the router has adequate routing information after it has been congured
for Internet access. Static routing is only necessary if the router is connected to network under a different subnets.
To view the Routing settings, click Advanced then select Routing.
Note: To enable a static routing, NAT must be disabled.
If the router is connected with a network under the different
subnet, the routing setup allows the network connection within
two different subnets.
Enable Static Routing
Click Enable Static Routing to activate the feature.
Destination LAN IP
Enter the LAN IP address of the destination device.
Subnet Mask
Enter the Subnet Mask of the destination device.
Default Gateway
Enter the default gateway IP address for the destination device.
Hops
Enter the maximum number of hops within the static routing
that a packet is allowed to travel.
Interface
Select LAN or WAN as the interface.
Click Add to save the settings and list the conguration in the
Current Static Routing table or Reset the discard changes.
View and select devices in the Current Static Routing Table.
Click Delete Selected or Delete All to remove devices
from the table. Click Reset to stop.
Click Apply to save the settings or Cancel to discard changes.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius ESR350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius ESR350 in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius ESR350

Engenius ESR350 User Manual - English - 1 pages

Engenius ESR350 Installation Guide - Dutch - 1 pages

Engenius ESR350 User Manual - Dutch - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info