619937

Engenius EP902 Manual

59
Zoom out
Zoom in
Previous page
1/65
Next page
~59~
(1)
Enter original (4 digits) of handset then press OK left soft key when
enter this menu.
(2)
Enter new password (4 digits) then press SAVE left soft key to confirm
new password.
i.
Press 9 to set Headset Ring: See Headset Ring operation on Page 52.
7.
Press 6 to set Base Settings:
When enter this menu, you must enter Base PIN code first (4 digits).
Re: The PIN code is for Base Settings. Default is “0000”.
a.
Press 1 to set DTMF Duration.
(1)
Enter the DTMF duration (90~200ms), press OK left soft key to confirm
the setting. Default is 100ms.
Re: Please check with your dealer before you change it. If the duration not
matches with PSTN or PBX setting, it may operate faultily.
b.
Press 2 select flash key timing. Default is 600ms.
(1)
Use or to scroll through option 1~9 (100~900ms). Or press
digit key (1~9) directly.
(2)
Press SELECT left soft key to confirm selection.
Re: The default value (600 ms) works in most areas. Changing this setting
may cause Flash key not working. Change only when you are certain of
the new value would work.
c.
Press 3 to set Assign Next HS
(1)
Enter 2-digit handset ID followed by pressing OK left soft key.
(2)
When register a new handset, the base will assign the specific handset
ID which assigned in advance to the new handset.
d.
Press 4 to set Clear HS
(1)
Enter 2-digit handset ID followed by pressing OK left soft key.
(2)
The base will erase the handset ID from system.
e.
Press 5 to Change PIN:
(1)
Enter the new Base PIN followed by OK left soft key.
Re: Default Base PIN is “0000”.
f.
Press 6 to set Auto Hang Up:
(1)
Use CHANGE left soft key to select and confirm on or off. The
Re: When setting “on”, the EP902 will automatically hang up if the far end
caller hung up already. However, this function depends on if there is
“dial tone or busy tone” signal sent out by PBX or PSTN, after the call
hung up.
g.
Press 7 to Set Time to support DTMF Caller ID:
(1)
Use SAVE left soft key to select and confirm the Date and Time you
have set (see Set Time operation on page 20).
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP902 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP902 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info