DELETE (Right) soft key to delete the last digit entered.
When completed, press SAVE (Left) soft key to save.
Re: Up to 16 characters can be entered as the name.
To enter the name, press the corresponding keypad
number one or more times according to the order of
the character on the key.
See table below for a list of available characters and
their orders. For example, press 2 once for the
character “A”, twice for “B”, etc.
Notes:
1. When enter a phone number, the cursor automatically advances to the
next digit field. Use or scrolling key to move the cursor
backward or forward to insert or delete (the digit above the cursor, or left
of the cursor if cursor is on the right of the last digit).
2. When entering a name, the cursor automatically advances to the next
character field if you press a different key for the next character. If you
need to enter consecutive characters from the same key, you can wait for
the cursor to advance or use or scrolling key to move the
cursor backward or forward manually. Also use or to move
the cursor to insert (to the left of the cursor) or delete (the character
above the cursor, or left of the cursor if cursor is on the right of the last
character).
3. By default, all letters are entered in the upper case. Use the ＊ key to
toggle between upper and lower cases.
4. A “Pause” entry represents a 1 second delay in dialing the following digits,
which is useful when calling a sequence of segmented numbers (e.g.,
access code, credit card number, auto-attendant entries, etc.) Pause is
entered by pressing the ＃ key twice (LCD displays P). Entering pause
twice (PP) will result in 2 seconds pause in the dialing.
