620000

Engenius EP802 Manual

28
Zoom out
Zoom in
Previous page
1/346
Next page
~55~
b. Press 2 to set Any Key TALK:
Use CHANGE left soft key to select and confirm “On” or “Off".
Default is “Off”.
Re: When set “on”, press any key (except and SILENT key) to
answer the incoming call.
c.
Press 3 to set LCD Contrast:
(1)
Use or to scroll through option 1~8. Default is 6.
(2)
Press SAVE left soft key to confirm selection.
d.
Press 4 to set LCD Backlight:
(1)
Use or to scroll through option 1~3 (1.8 seconds 2.On
3.Off ). Default is “8 seconds”.
(2)
Press SAVE left soft key to confirm selection.
e.
Press 5 to set Name Tag:
(1)
Use CHANGE left soft key to select and confirm “On” or “Off".
Default is “Off”.
(2)
Press SAVE left soft key to confirm selection.
Re: When Set “On”, the handset match the caller ID with the phone
book entries; once matched, the LCD screen will display the name
or nickname instead of pure caller ID info (needs Call Waiting
with Caller ID service from local telephone company)
f.
Press 6 to set Language:
(1)
Use or to scroll through option (English, Spanish,
French, Italian, German, Dutch, Polish, Czech, Hungary,
Romanian, Turkish).
Default is “English”.
(2)
Press SAVE (Left) soft key to confirm selection.
g.
Press 7 to set Custom Name:
(1) Enter characters using the Character Table and method
discussed in the Phonebook section.
(2)
Use
or to move the cursor backward or forward to
insert (to the left of the cursor) or delete (the character above the
cursor, or left of the cursor if cursor is on the right of the last
character).
~56~
(3) Press SAVE (Left) soft key to confirm setting.
Re: Once entering the custom name, the greeting of LCD in standby
mode will be changed as the entering.
Defalut greeting is “EP802”.
h.
Press 8 to Change Password:
(1)
Enter original password (4 digits) of handset then press OK left
soft key when enter this menu.
(2)
Enter new password (4 digits) then press SAVE left soft key to
confirm new password.
i.
Press 9 to set Headset Ring: See Headset Ring operation on Page
51
.
7.
Press 6 to set Base Settings:
When enter this menu, you must enter Base PIN code first (4 digits).
Re: The PIN code is for Base Settings. Default is “0000”.
a.
Press 1 to set DTMF Duration.
(1)
Enter the DTMF duration (90~200ms), press OK left soft key to
confirm the setting. Default is 100ms.
Re: Please check with your dealer before you change it. If the duration
not matches with PSTN or PBX setting, it may operate faultily.
b.
Press 2 select flash key timing. Default is 600ms.
(1)
Use or to scroll through option 1~9 (100~900ms). Or
press digit key (1~9) directly.
(2)
Press SELECT left soft key to confirm selection.
Re: The default value (600 ms) works in most areas. Changing this
setting may cause Flash key not working. Change only when you
are certain of the new value would work.
c.
Press 3 to set Assign Next HS
(1)
Enter 2-digit handset ID followed by pressing OK left soft key.
(2)
When register a new handset, the base will assign the specific
handset ID which assigned in advance to the new handset.
d.
Press 4 to set Clear HS
(1)
Enter 2-digit handset ID followed by pressing OK left soft key.
(2)
The base will erase the handset ID from system.
e.
Press 5 to Change PIN:
(1)
Enter the new Base PIN followed by OK left soft key.
Re: Default Base PIN is “0000”.
f.
Press 6 to set Auto Hang Up:
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP802 in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 21,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP802

Engenius EP802 Installation Guide - English - 2 pages

Engenius EP802 Installation Guide - Dutch - 2 pages

Engenius EP802 User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info