620000

Engenius EP802 Manual

25
Zoom out
Zoom in
Previous page
1/346
Next page
~49~
Call Manager
“Call Manager” feature allows two options：
1.One is the handset to be set to receive incoming calls or make outgoing
calls (2-way intercom, broadcast and transferred call are allowed). The
option is selectable by base station 1 to base station 4.
Re: “Call Manager” item will be hidden if Multi-Base function is disabled.
2.The other option is the handset to be set to access to available bases
automatically or manually.
For 1
st
option (Subscribe BS)：
1.
Press MENU right soft key followed by 4 to enter the
Call Settings mode.
Press “6” to select Call Manager.
Re: “Call Manager” item available or selectable only if
Multi-Base function is enabled.
2.
Press 1 to set Subscribe BS.
Re：When entering the submenu of Subscribe BS,
the LCD will show the available bases which
already subscribed.
Call Manager
1.Subscribe BS
SELECT BACK
3.
Press
or key to select the desired base station (#1~4), press
CHANGE left soft key to set the Subscribe BS ON/OFF.
4. If set the Subscribe BS ON, that means the handset is able to access
the line of the desired base station, so the handset is able to make
outgoing call or answer incoming call via the desired base station.
On the contrary, if set the Subscribe BS OFF, then the handset can’t
access the line of the desired base station, so the handset isn’t able to
make outgoing call or answer incoming call via the desired base station.
For 2
nd
option (BS Selection)：
1.
Press MENU right soft key followed by 4 to enter the
Call Settings mode.
Press “6” to select Call Manager.
~50~
2.
Press “2” to set BS Selection.
Re：Default setting is “OFF”.
Call Manager
2.BS Selection
SELECT BACK
3.
Press CHANGE left soft key to set the BS Selection ON/OFF.
Re：If BS Selection set “ON＂, when pressing
or
key, the LCD will show the available bases
(Lines), i.e. 1, 2, 3, 4. Press digit “1”, you can access
to base 1 to get the line.
Note：When single base, no “Call Manager” setting in “Call Settings”.
Visual Message Waiting Indicator (VMWI)
VMWI feature supported the FSK message which received from telephone
line; It will activate a message icon of handset and flash the VOICE
MESSAGE LED of base.
Notes:
1. A subscription to telephone company voice mail service is required.
2. If the handset still indicates the icon even after you have listened all messages,
turn it off by pressing and holding “Caller ID” key on the handset.
Adjust Handset Microphone Gain
In case you will use the handset in different workplace or environment, to
perform better voice quality for the other end, you can adjust the handset
microphone gain to suit for variable place.
a.
Press MENU right soft key while the handset is in the standby
mode.
b. Press “5” (Phone Settings), followed by “1” to enter the “Mic. Gain”
menu.
c.
Use
or key to scroll the “Standard”, “Medium” and “Low”
options.
d.
If you are using the handset in quiet environment, like office or
meeting room, the level of “Standard” is recommended.
If you are using the handset in a noisy environment, like factory or
outdoor place, the level of “Medium” or “Low” is recommended.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP802 in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 21,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP802

Engenius EP802 Installation Guide - English - 2 pages

Engenius EP802 Installation Guide - Dutch - 2 pages

Engenius EP802 User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info