620000
18
Zoom out
Zoom in
Previous page
1/346
Next page
~35~
then, within 2 seconds, press the digit ” to unlock.
3.
Once returning back to standby mode for 15 seconds,
the keyguard will be automatically enabled.
4. Key Guard is in effect until unlocked.
Battery Recharge and Replacement
1. Charge the battery when one or several of the following happen:
a. Phone beeps twice (every 60 seconds in talk mode, every 10
minutes in standby mode).
b. Battery icon is empty.
c.
Phone does not respond when a power on/off key
is pressed.
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2.
You can replace the handset battery after placing the call-in-progress on
hold and press
key. To retrieve the call on held, press talk key again
after replaced battery and power the handset on..
3. Battery talk time and standby time vary depending on the talk/standby
pattern and the operating distance. Putting the handset back to charger
cradle as often as possible is recommended for best performance. Use
only manufacturer provided battery and charger!
~36~
Advanced Operations
Handset Registration
1. If your handset(s) is purchased as part of a system, it has been pre-
registered with the base station at the factory.
2. If Handset ID as “00,” that means it is a new handset or the ID has been
erased. You need to register the handset with the base station.
3. Registration:
a.
Press MENU-7 to enter the registration mode
b.
Press and hold the base’s PAGE button for 3
seconds until the In Use LED (white color) lighting
up and flashing, also the base station will emit
prompt sound to remind you the base station is in
the registration mode..
c. Press handset key “1, this completes the
registration process. The base station will assign a
handset ID between 12 and 19 automatically. The
assigned ID will be displayed on the handset LCD,
indicating successful registration.
d. Repeat above steps for all additional handsets.
4. De-registration:
a. You can de-register the handset you’re using from
the base station. De-registration will reset the
Handset ID to 00, erase the system security code,
and free up the handset ID for future registration.
b. After deregistration, the handset will not be able to
use the base station to make or receive phone
calls, nor can it intercom other handsets.
c.
Press MENU-7 to enter the registration mode
d.
Press and hold the base’s PAGE button for 3
seconds until the In Use LED (white color) lighting
up and flashing, also the base station will emit
prompt sound to remind you the base station is in
the de-registration mode.
e. Press the handset number key “2”, this completes
the de-registration process. Upon successful de-
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP802 in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 21,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP802

Engenius EP802 Installation Guide - English - 2 pages

Engenius EP802 Installation Guide - Dutch - 2 pages

Engenius EP802 User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info