Manual Engenius EP800 (page 10 of 351) (German, Dutch, French, Italian, Polish, Turkish, Spanish)

619916

Zoom out

Zoom in

1/351

~19~

24.

Programmable Flash key timing

a. From MENU-6-2 to select flash key timing

b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms.

c. The default value (600 ms) works in most areas. Changing this

setting may cause Flash key not working. Change only when you

are certain of the new value would work.

d. When entering the Base Settings, PIN is required. Default is “0000”.

25.

Assign next handset ID for new handset

Using registered handset from MENU-6-3 to assign a next handset

ID to a new handset.

b. If not assign next handset ID, the system will automatically assign a

handset ID to a new handset..

c. When entering the Base Settings, PIN is required. Default is “0000”.

26.

Clear Handset

Using registered handset from MENU-6-4 to remove the other

registered handset, in case the other registered handset is defected.

b. Once clear the other registered handset, the user is able to register a

new handset for instead.

c. When entering the Base Settings, PIN is required. Default is “0000”.

27.

Change PIN

Allow changing the base PIN which requires entering the “Base Settings”

(MENU-6-5).

Using registered handset to change PIN from MENU-6-5.

b. Default PIN is “0000”.

c. When entering the Base Settings, PIN is required. Default is “0000”.

28.

Auto Hang Up feature

Using registered handset from MENU-6-6 to turn on/off the Auto

hand up feature.

b. If turning on the feature, the handset will automatically hang up the

call when the far-end hangs up the call.

c. When entering the Base Settings, PIN is required. Default is “0000”.

29.

Area Code

The area code function allows calls within local and country area codes

to be dialed without the prefix.

a. Enter MENU-4-7-1 to set the “Local” area code.

Enter MENU-4-7-2 to set the “Country” area code.

Re: Up to 3 digits can be entered.

~20~

30.

Multiple Base setting

Up to 4 base stations can be set in one system.

Re:

For best performance, maintain a distance of at least 5 meters

(about 15 feet) between any two base stations.

31.

Set Time

The set time function allows user to set date/time to support the DTMF

caller ID (DTMF caller ID doesn’t attach date/time when receiving from

PSTN, using this setting, user is able to review the date/time when the

caller ID received).

a. Enter MENU-6 to set Base Settings.

Press or scrolling key to select desired base station

when Multi-Base is set.

c. Enter Base PIN (Default is “0000”).

d. Enter “7” to enter Set Time.

e. Enter 4 digits for MM/DD(Month/Day), then enter 4 digits for hr:mm

(Hour：Minute)

f. Press SAVE (left soft key) to finish the setting.

32.

Mic Gain

Allow changing the handset microphone gain based on the handset in

different environment – Quiet, Normal and Noisy environment.

This requires entering the “Phone Settings” (MENU-5-1).

33.

Headset Ring

Allow changing the ringer emitted either from handset speaker or

receiver of headset.

This requires entering the “Phone Settings” (MENU-5-9).

34.

Baby Monitor

Allow setting the handset monitoring the baby room via intercom call.

When setting Baby Monitor ON, this dedicated handset will not answer

any incoming call, except the 2-way intercom.

This requires entering the “Call Settings” (MENU-4-5).

i was having trouble with my phone pressed the reset button now the phones will not connect Submitted on 7-9-2021 at 13:23
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP800 in the language / languages: German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 11,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP800

Engenius EP800 Installation Guide - English - 2 pages

Engenius EP800 User Manual - English - 351 pages

Engenius EP800 Installation Guide - Dutch - 2 pages

Engenius EP800 User Manual - Dutch - 31 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Engenius EP800 Manual

Product: