Manual Engenius EP 801 (page 26 of 152) (English, German, French, Italian, Spanish)

458104

Zoom out

Zoom in

1/152

~51~

b. Press “2” to Group Select: see Handset Group Subscription on page

35 .

c. Press “3” to set Call Barring: see Call Barring operation on Page 41.

d. Press “4” to set Feature Call: see Feature Call operation on Page 42.

e. Press “5” to set Call Manager: see Call Manager operation on Page

47.

f. Press “6” to set Area Code:

The area code setting allow calls within local and regional area codes

to be dialed without prefix.

(1) Set Local Area Code :

Press MENU-4-6-1 to set the LAC. Enter the local area code (3-

digit) then press SAVE (Left) soft key to confirm selection.

(2) Set Country Area Code :

Press MENU-4-6-2 to set the country code. Enter the code (3-

digit) then press SAVE (Left) soft key to confirm selection.

6. Press “5” to set Phone Settings:

a. Press “1” to set PA On/Off

Use CHANGE (Left) soft key to select and confirm on or off.

Re: When set “off”, the handset will not receive

broadcast from other handsets or base. The

LCD will display a PA off icon to prompt.

b. Press “2” to set Any Key TALK:

Use CHANGE (Left) soft key to select and confirm on or off.

Re: When set “on”, press any key (except ) to answer the

incoming call.

c. Press “3” to set LCD Contrast:

(1)

Use or to scroll through option 1~8. Default is 4.

(2)

Press SAVE (Left) soft key to confirm selection.

d. Press “4” to set LCD Backlight:

(1)

Use or to scroll through option 1~3 (1.8 seconds

2.On 3.Off ). Default is “8 seconds”.

(2)

Press SAVE (Left) soft key to confirm selection.

e. Press “5” to set Name Tag:

(1)

Use or to scroll through option on or off. Default is

“Off”.

(2)

Press SAVE (Left) soft key to confirm selection.

Re: When Set “on”, if matching the caller ID with the phone book

entries; once matched, the LCD screen will display the name or

nickname instead of pure caller ID info (needs Call Waiting with

~52~

Caller ID service from local telephone company)

f. Press “6” to set Language:

(1)

Use or to scroll through option 1~3 (1.English

2.Spanish 3.French ). Default is “English”.

(2)

Press SAVE (Left) soft key to confirm selection.

g. Press “7” to set Custom Name:

(1)

Enter characters using the Character Table and method

discussed in the Phonebook section.

(2)

Use or to move the cursor backward or forward to

insert (to the left of the cursor) or delete (the character above the

cursor, or left of the cursor if cursor is on the right of the last

character).

(3)

Press SAVE (Left) soft key to confirm setting.

Re:

Once entering the custom name, the greeting of LCD in standby

mode will be changed as the entering.

h. Press “8” to Change Password:

(1)

Enter original password (4 digits) when enter this menu.

(2)

Enter new password then press SAVE (Left) soft key to confirm

new password.

7. Press “6” to set Base Settings:

When enter this menu, you must enter PIN code first (4 digits).

Re: The PIN code is for Base Settings.

a. Press “1” to set DTMF Duration.

(1)

Enter the DTMF duration (90~200ms), press OK (Left) soft key to

confirm the setting. Default is 100ms.

Re: Please check with your dealer before you change it. If the duration

not match with PSTN or PBX setting, it may operate faultily.

b. Press “2” select flash key timing. Default is 600ms.

(1)

Use or to scroll through option 1~9 (100~900ms).

(2)

Press SELECT (Left) soft key to confirm selection.

Re: The default value (600 ms) works in most areas. Changing this

setting may cause Flash key not working. Change only when you

are certain of the new value would work.

Press “3” to set Assign Next HS

(1)

Enter 2-digit handset ID followed by pressing OK (Left) soft key.

(2)

When register a new handset, the base will assign the specific

handset ID which assigned in advance to the new handset.

Press “4” to set Clear HS

(1)

Enter 2-digit handset ID followed by pressing OK (Left) soft key.

(2)

The base will erase the handset ID from system.

Press “5” to Change PIN:

(1)

Enter the new PIN followed by OK (Left) soft key.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP 801 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP 801

Engenius EP 801 User Manual - English - 152 pages

Engenius EP 801 Installation Guide - English - 2 pages

Engenius EP 801 User Manual - English, German - 152 pages

Engenius EP 801 Installation Guide - Dutch - 2 pages

Engenius EP 801 User Manual - French, Italian, Spanish - 152 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Engenius EP 801 Manual

Product: