458104
23
Zoom out
Zoom in
Previous page
1/152
Next page
~45~
Call a Caller ID
1.
When display a caller ID, Press or to dial
this number.
2.
The displayed caller ID normally will be a 10-digit
number with a 3-digit area code followed by the 7-digit
telephone number.
The number in call log can be modified to comply with
the local dialing rules.
3.
Press key, use or key to scrool the
call log.
4.
To display the telephone number without “1” or area
code, press FORMAT (Left) soft key.
5.
For example, the number stored in the call log is “1-
555-423-1234”, press the FORMAT (Left) soft key
once, the displayed number will be changed to “423-
1234”.
Press the FORMAT (Left) soft key a second time, it
will be changed to “555-423-1234”.
Press the FORMAT (Left) soft key a third time, it will
be changed to original number “1-555-423-1234”.
6.
Press or to dial this displayed number which
complies with the dialing rules.
Note: Normally the standard format of telephone
number is 10-digit or 11-digit, if the number
doesn’t meet the format (For example, over 11-
digit), then the displayed number will not be
modified as above item 5 when press FORMAT
(Left) soft key.
Base Speed Dial Setting
1.
You can store up to 20 entries in the speed dial memory. Each speed
dial memory can contain a phone number (up to 32 digits).
2.
Base during standby mode, press key, enter the telephone
number.
3.
Press key, followed by a 2-digit memory location, base then will
emit a two short tone (Bi-Bi) to confirm the setting.
~46~
Re: The memory location is “00” ~ “19”.
4.
When using the base speed dail, press key followed by
key, then enter the 2-digit memory location (“00”~”19”).
The base will dial the telephone number accordingly.
Base Ringer Setting
1.
You can change the base ringer by following :
2.
Base during standby mode, press key twice, followed by
or key, the base speaker will emit the varied ringer (up to 8
ringer tones).
3.
Press key to confirm the setting.
4.
To adjust the ringer volume, two options can be followed:
a. Base during standby mode, press or key.
b. When incoming call, press or key.
c. When press or key to adjust the volume, the speaker will
emit the loudness of ringer, you can choose the preference.
Re: The loudness level of ringer is “0~4”, “0” means ringer “Off”.
Multi-Base Setting
“Multi-Base” setting allows expanding coverage or lining capacity. When
adding 2
nd
, 3
rd
or 4
th
base, using one of the handsets which registered to the
1
st
base (i.e. the handset with ID 11), followed by below processes
1.
Press MENU, followed by “7” to enter the registration
mode.
2.
Press & hold the base REG button for thress seconds,
the base will emit the prompt ringing (also the base
speakerphone & Intercom LED is flashing).
3.
Press digit “3” of handset to enter the Multi-Base
mode.
4.
Select BS # 1
5.
Repeat above step 1 ~ 4 to continuously add the 2
nd
,
3
rd
or 4
th
base.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP 801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP 801 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP 801

Engenius EP 801 User Manual - English - 152 pages

Engenius EP 801 Installation Guide - English - 2 pages

Engenius EP 801 User Manual - English, German - 152 pages

Engenius EP 801 Installation Guide - Dutch - 2 pages

Engenius EP 801 User Manual - French, Italian, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info