458104
8
Zoom out
Zoom in
Previous page
1/152
Next page
~15~
a. Allow changing the Base PIN which requires to enter in Base
Settings (MENU-6).
Re: Default is “0000”.
24.
DTMF Duration
a. From MENU-6-1 to select variable duration of DTMF tone.
b. Default is 100ms.
c. When entering the base setting, PIN is required. Default is “0000”.
Re:
Better to check with your phone company first before changing it.
25.
Programmable Flash key timing
a. From MENU-6-2 to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms.
c. The default value (600 ms) works in most areas. Changing this
setting may cause Flash key not working. Change only when you
are certain of the new value would work.
d. When entering the base setting, PIN is required. Default is “0000”.
26.
Assign next handset ID for new handset
a.
Using registered handset from MENU-6-3 to assign a next handset
ID to a new handset.
b. If not assign next handset ID, the system will automatically assign a
handset ID to a new handset..
c. When entering the base setting, PIN is required. Default is “0000”.
27.
Clear Handset
a.
Using registered handset from MENU-6-4 to remove the other
registered handset, in case the other registered handset is defected.
b. Once clear the other registered handset, the user is able to register a
new handset for instead.
c. When entering the base setting, PIN is required. Default is “0000”.
28.
Change PIN
Allow changing the base PIN which requires to enter the “Base Settings”
(MENU-6-5).
a.
Using registered handset to change PIN from MENU-6-5.
b. Default PIN is “0000”.
c. When entering the base setting, PIN is required. Default is “0000”.
29.
Auto Hang Up feature
a.
Using registered handset from MENU-6-6 to turn on/off the Auto
hand up feature.
b. If turning on the feature, the handset will automatically hang up the
~16~
call when the far-end hangs up the call.
c. When entering the base setting, PIN is required. Default is “0000”.
30.
Area Code
The area code function allows calls within local and country area codes
to be dialed without the prefix.
a. Enter MENU-4-6-1 to set the “Local” area code.
b.
Enter MENU-4-6-2 to set the “Country” area code.
Re: Up to 3 digits can be entered.
31.
Multiple Base setting
a.
Up to 4 bases can be set in one system.
32.
Set Time
The set time function allows user to set date/time to support the DTMF
caller ID (DTMF caller ID doesn’t attach date/time when receiving from
PSTN, using this setting, user is able to review the date/time when the
caller ID received).
a. Enter MENU-6 to set Base Settings.
b.
Press or scrolling key to select desired base.
c. Enter Base PIN (Default is “0000”).
d. Enter “7” to enter Set Time.
e. Enter 4 digits for MM/DD(Month/Day), then enter 4 digits for hr:mm
(HourMinute)
f. Press SAVE (left soft key) to finish the setting.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP 801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP 801 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP 801

Engenius EP 801 User Manual - English - 152 pages

Engenius EP 801 Installation Guide - English - 2 pages

Engenius EP 801 User Manual - English, German - 152 pages

Engenius EP 801 Installation Guide - Dutch - 2 pages

Engenius EP 801 User Manual - French, Italian, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info