619944
11
Zoom out
Zoom in
Previous page
1/65
Next page
10
Only experienced installation professionals who are familiar with outdoor
wireless network should attempt to install the ENH700EXT.
2.1 Installation Considerations
There are many considerations on where to place the ENH700EXT. The followings are the main
considerations on where to mount the device. The first consideration is available line of sight to
the area or building that you wish to provide wireless network connectivity. Other buildings,
mountains, hills, trees, thick brush can all attenuate the or inhibit the wireless signal.
The second consideration is distance. You should calculate the EIRP (Effective Isotropic
Radiated Power) correctly to properly configure the ENH700EXT using this calculation for the
distance you intend to build the wireless link (see Glossary at the end of this manual for the
EIRP formula). Don't place multiple ENH700EXT’s too far away from one another since the AP
uses default Omni directional (not directional) antennas. If you plan to have a longer range
connection, you can consider identically-matching directional antennas to connect to the
ENH700EXT on both transmit and receiving ends.
2.2 Assembling the ENH700EXT
Carefully remove the ENH700EXT unit, the Omni 5dBi and 2.4dBi Antennas(two each), EPE-
48GR PoE Injector, and power adaptor. As mentioned earlier in this Manual, the Ethernet cables
are required and not provided within the ENH700EXT package.
1. Install all 4 antennas onto the ENH700EXT by screwing them toward the ENH700EXT
until the threads on the screw are not visible.
2.
Ensure that all antennas screw on straight. Failure to do so may
damage the ENH700EXT antenna connectors
3. Insert a shielded Ethernet cable into the RJ-45 port on the ENH700EXT. You need to
consider the length of this cable based on the distance from where the PoE injector is
which in a weather protected place such as indoor or a water tight box to the
ENH700EXT. Use high quality cable is highly recommended.
4. Insert the other end of the Ethernet cable to the EPE-48GR PoE Injector on the port
labeled AP/Bridge.
5. Take a second Ethernet cable and connect it to the Network port of the EPE-48GR PoE
Injector.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius ENH700EXT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius ENH700EXT in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info