619991
138
Zoom out
Zoom in
Previous page
1/156
Next page
138
Local Logging:
From here, you can discover the paths that a packet
takes to a destination.
The Switch supports log output to two directions: Flash
and RAM. The information stored in the system’s Flash log
will be lost after the Switch is rebooted or powered off,
whereas the information stored in the system’s RAM will
be kept effective even if the Switch is rebooted or powered
off.
Target:
The method for saving the switch log, to
Flash, RAM or both.
Flash:
Log erased after reboot or power off
RAM:
Log stored in RAM. Will only be erased after
system reset.
Severity Level:
Refer to severity level table.
Logs with the selected severity level and all logs of greater
severity are sent to the host. For example, if you select
Error, the logged messages include Error, Critical, Alert,
and Emergency.
Target: Select Yes or No from the list. If the device is
not functioning properly, an emergency log mes-
sageissavedtothespeciedlogginglocation.
EMERG: Select Yes or No from the list. If the Switch is
not functioning properly, an emergency log mes-
sageissavedtothespeciedlogginglocation.
ALERT: Select Yes or No from the list. If there is a
serious Switch malfunction, then all Switch
features are down.
CRIT: Select Yes or No from the list. A critical log is
saved if a critical Switch malfunction occurs.
ERROR: Select Yes or No from the list. If triggered, a
device error has occurred.
WARNING: Select Yes or No from the list. The device is
functioning, but an operational problem has
occurred.
NOTICE: Select Yes or No from the list. This will provide
information about the Switch.
INFO: Select Yes or No from the list. This will provide
information about the Switch.
DEBUG: Select whether the Yes or No from the list. This
will provide a debugging message.
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EGS7252FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EGS7252FP in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EGS7252FP

Engenius EGS7252FP Installation Guide - English - 3 pages

Engenius EGS7252FP Installation Guide - Dutch - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info