619929
24
Zoom out
Zoom in
Previous page
1/64
Next page
Multi-Function Gigabit Wireless-N Client Bridge Version 2.0
24
Information Interchange - alphanumeric characters) format. ASCII format is provided
so you can enter a string that is easier to remember.
Default Key: You may choose one of your 4 different WEP keys from below.
Encryption Key 1-4: You may enter four different WEP keys.
Enable 802.1x Authentication: Place a check in this box if you would like to use
RADIUS authentication. This option works with a RADIUS Server to authenticate
wireless clients. Wireless clients should have established the necessary credentials
before attempting to authenticate to the Server through this Gateway. Furthermore, it
may be necessary to configure the RADIUS Server to allow this Gateway to
authenticate users. You will then be required to specify the RADIUS Server’s IP
address, port, and password.
Click on the Apply button to save the changes.
3.2.4.2.4.3 WPA (Wi-Fi Protected Access) / Pre-shared
Key
Click on the Security link under the Wireless drop-down menu.
WPA (Wi-Fi Protected Access) is designed to improve upon the security features of
WEP (Wired Equivalent Privacy). The technology is designed to work with existing
Wi-Fi products that have been enabled with WEP. WPA provides improved data
encryption through the Temporal Integrity Protocol (TKIP), which scrambles the keys
using a hashing algorithm and by adding an integrity checking feature which makes
sure that keys haven’t been tampered with.
ESSID Selection: As this device supports multiple SSIDs, it is possible to configure
a different security mode for each SSID (profile). Select an SSID from the drop-down
list.
Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID
broadcast feature.
When this option is set to Enable, your wireless network name is
broadcast to anyone within the range of your signal
. If you're not using encryption then
they could connect to your network. When this is disabled, you must enter the
Wireless Network Name (SSID) on the client manually to connect to the network.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius ECB9500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius ECB9500 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info