729081

Engenius DuraFon USL Manual

23
Zoom out
Zoom in
Previous page
1/35
Next page
~
45
~
2.
Press
HOLD
soft key to put call on hold.
3.
Press
OPTION
soft key
to enter feature list for selection.
4. Press number 2 and enter a two-digit Handset IDto call another handset
extension.
a.
Un
-
announced Call Transfer:
Press END before the destination handset answers, the call is
automatically transferred to the destination handset.
b.
No
support
A
nnounced Call Transfer
in DuraFon PSL
-
BU
Notes:
1. If the destination handset does not answer after handset paging
timeout, the call is routed back to the originating handset.
2. Above described “Call Transfer” is for DuraFon PRO handset-to handset
call transfers.
Base Select (Register to PRO base only )
1.
A handset can manually select the desired base station before
access outbound line.
2.
Press handset MENU (Right) soft key.
3.
Press the number 5 , this will enter the handset setting menu.
4.
Press number 3 , handset enters Base Select setting mode.
5
Use or arrow to scroll up and down the selection
on/Off.
6.
Make a selection (default =off), and press SAVE (Left softkey).
Re: When turns on the Base Select, you must enter 2-digit Base
ID after press key.
Notes:
1. Because this setting allows handset manually select the base station, the
~
46
~
handset must be in range with the direct base station.
Visual Message Waiting Indicator (VMWI)
VMWI feature is supported via FSK message signaling when received from the
phone company telephone line or PBX system; It will activate a message icon on the
handset display and flash the VOICE MESSAGE LED on the base.
Notes:
1. A subscription to the telephone company voice mail service is required.
2. If the handset still indicates the icon even after you have listened to all
messages, turn it off by pressing and holding the “Caller ID” key on the
handset.
Line Dedication (Register to PRO base only)
1 Line dedication function can be performed by administrator handsets (ID 10
and 11) only.
2 By default all incoming calls will ring all handsets.
3 With the administrative handset, press MENU- 9 – 2 - 2 for Line Dedication
setting.
4 It will first show Line 1 and line status. If you wish to dedicate line 1 to a
specific handset or group, you need to press CHANGE. For DuraFon PSL-BU
base, you don’t need to set line2-4 related setting.
5 After choosing a line, it will show YES and NO, when choosing YES, you need
to enter the handset ID or group ID for extension number. If you choose NO,
it will go back to Line Setting menu.
Notes:
1. When entering Line Dedication setting, it will show line and status. If line is
already dedicated to a specific handset or group, it will show the handset or
group ID behind the line. If line isn’t dedicated to a specific handset yet, it will
show “ALL HS” behind the line.
2. When setting Line Dedication, make sure the handset or group ID is correct to
avoid losing calls sent to an DuraWalkie handset or invalid ID.
3. Handsets dedicated to a port will also receive calls from non-dedicated line as
well as the handset’s dedicated line. Use Line Dedication for a group on other
lines to further manage calls
Line Selection (Register to PRO base only)
1. Press MENU - 5 - 8 while the phone is in standby to enter Line Select menu.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius DuraFon USL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius DuraFon USL in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info