729078

Engenius DuraFon-SIP System Manual

7
Zoom out
Zoom in
Previous page
1/39
Next page
~
13
~
Handset Features
Basic Handset Features
1. 4-Line LCD (Liquid Crystal Display)
a. The LCD display has LED (Light Emitting Diode) for backlighting.
b. The 1
st
line of LCD consists of icons.
c. Icons explanation from left to right
(1)
RSSI level (Receive Signal Strength Indicator)
During a call, the number of bars is proportional to
the radio signal strength received.
(2)
Link mode
(2.1) Call in-progress (ON/OFF-Hook)
Indicates if the phone line is in the OFF-Hook status.
(2.2) Intercom in-progress
Indicates if Intercom mode is active.
Indicates the Handset ID that is sending the intercom call.
(3)
Line, Sound and Indication
(3.1) Line Indicator
Indicates when using line 1 or the incoming call from FXO line.
(3.2) SIP Indicator
Indicates when using SIP or the incoming call from SIP.
(3.3) Enable ringer
(3.4) Disable ringer
(3.5) Ringer and vibrate mode
(3.6) Vibrate mode
(3.7) Message waiting indicator
(4)
Disable PA and indicate speaker phone
(4.1) Indicates if the incoming broadcast is disabled.
(4.2) Speaker indicator
Indicates if the speakerphone is active.
(5)
11
Two-Digit Handset ID
Displays the 2-digit Handset ID of owner.
(6)
Battery Strength
Number of bars is proportional to the amount of battery time remaining.
d. The 2
nd
and 3
rd
lines of the LCD, maximum 16-characters each, display
status, message, menu selections, or user-editable alphanumerical
characters
.
~
14
~
e. The last line displays the left and right soft keys.
2.
Ringer
a.
Rings to an incoming ca
ll
and intercom call
.
b.
Distinctive alert sounds indicating various events:
(1) Single beep: successful key entry.
(2) Double beep: indicates power on/off.
(3) Triple beep: failed operation.
(4) Periodic 1-Long 2-Short beeps (every 1 minute): low battery warning; out of
range; call on hold.
Re: No beep: invalid key entry.
3.
TALK/FLASH ( )
a.
Places or answers a telephone or intercom call
.
b. Sends a Flash signal to the phone line to retrieve a dial tone after the call
ends, or to perform the Call Waiting feature provided by local phone
compan
ies
during a call.
4.
SPEAKERPHONE ( )
Press and hold the key for over 2-seconds to enable/disable the speakerphone
during incoming, outgoing or intercom call.
5.
2-WAY INTERCOM (( ))
a. Places an intercom call to another handset, a group handset (group paging)
or all registered handsets.
b. Intercom calls are digital, full duplex, and are conducted without the
assistance
of
the base
station
.
6.
BROADCAST ( )
a.
Half duple
x broadcasting to handsets for immediate announcement
.
b.
Half duplex broadcasting to base stations
.
Re：Press the key on the left top corner of the handset to activate
the broadcast function.
7.
Left/Right Soft Keys ( )
a.
Make menu selection.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius DuraFon-SIP System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius DuraFon-SIP System in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info