Manual Engenius DuraFon PRO (page 14 of 38) (English)

729077

Zoom out

Zoom in

1/38

Base Station Installation

For best performance, maintain a distance of at least 1 meter (about 3 feet)

between the base station and other electronic devices (e.g., TV, computer, stereo,

fax machine, answer machine, cordless phone, etc.)

Install base station antenna.

The base station’s antenna port has a reverse-thread connector; to

install antenna or cable, turn counter-clockwise; to remove, turn

clockwise. Improper installation may damage the connector.

2. Plug the transformer end of the base station AC/DC adaptor into a

standard AC electrical power outlet, plug the other end into the “DC In”

jack on the back of the base station.

a. The base adaptor’s DC plug is larger in dimension than the charger’s

DC plug. The charger adaptor’s DC plug will not fit into the base’s

DC In jack.

b. The base station’s power supply (DC Adaptor) and telephone line

should be plugged into a surge protector with phone line protection.

3. Plug one end of the phone cord into one of the 4 phone jacks marked L1

~ L4 and plug the other end into the telephone outlet. Since DuraFon

PRO has the built-in “line detection” feature, it is okay to plug in the

phone jacks in random order.

Connect an external telephone answering device by following the

instructions that come with the answering device. An exemplary

configuration: install the external answering device in-between the wall

phone jack(s) and the Base Station. Either a multiple of single-line

answering devices or a multiple-line answering device can be used.

5. To use the Music/Message-On-Hold feature: Connect one end of a

standard audio cable into a radio or audio player, and plug the other (3.5

mm) end into the MOH jack on back of the base.

To ground the grounding wi

Loosen the screw of grounding jack ( ) on the rear of base.

Insert the grounding wire

(enclosed in the box)

Tighten the screw.

Connect the grounding wire to the ground.

Re:

Proper grounding is very important to protect the base station from

the external noise and to reduce the risk of electrocution in the

event of a lightning strike.

Notes:

Recommended phone line features from the local phone company:

Multiple phone lines “hunt group” is a useful feature and works well with

this phone system. This feature “ties” multiple phone lines to a single

phone number. When an outside caller calls this common phone number,

the phone company automatically finds a free line. In a hunt group, the

Call Waiting and the Caller ID with Call Waiting (or called Type II Caller ID)

features are unnecessary because a 2

call will come in on a separate line,

rather than on the same line. For a 2

call coming in on a separate line,

the phone system’s built-in Call Waiting feature will alert the user and

allow the user to toggle between 2 lines.

Multi

base setups

EnGenius DuraFon PRO has the capability to expand the coverage or

capacity.

Re: For best performance, maintain a distance of at least 10 meters

(about 30 feet) between any

two base

stations.



Expanding coverage

Parallel connects all L1/L2/L3/L4 in each base as below schematic(up

to 8 bases), the use coverage will be several times increased.

Note: Telephone calls cannot be handed off between base units.

Re : when a call is coming in from L1, all handsets can pick up the

Legacy

PBX

Base

2 3 4

1 2 3

1 2 3 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Engenius DuraFon PRO in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Engenius DuraFon PRO Manual

Product: