490413

Engenius Durafon 4X - SP922 Manual

14
Zoom out
Zoom in
Previous page
1/27
Next page
Making a Telephone Call
1.
Press TALK, wait for dial tone, and then enter phone number.
2. Alternatively, you can enter phone number first then press
TALK key.
When using this method, you can use the CLEAR (Left) and
DELETE (Right) soft keys to edit the number entered. “Delete”
erases the last digit entered. “Clear” erases the entire line but
remains in the dialing mode.
3.
Speed dial by access the entries in the phone book
a. Press ¿orÀ scrolling key to enter the phone book
b.
Press TALK to dial the number.
4. To abort dialing, press END key.
Main menu
Notes:
1. After a link established, the Base ID will appear on the upper-
right corner. If no Base ID show up, it applied that you are
approaching the boundary of the coverage.
2. If the line is occupied, the LCD shows “No Line Available”
and handset returns to standby mode.
3. If a link cannot be established, the LCD will show “No Base”
after a 12-second time out.
4. A call duration timer will start displaying the length of the call
after link is established.
Sub-menu
1.Dialed
2.Received
3.Missed
1.Ke
Guard
2.PhoneBook
1.Ring Volume
2.Ring Tone
3.Key Volume
4.Ke
y
Tone
1.Dial Prefix
2.Group Select
3.Forwarding
4.Clear
5.Naming
6.Contrast
7.Backlight
8.Line Select
9.PBX Options
0.Language
6.Re
g
istration
7.Text Messa
g
e
5.Settin
g
s
4.Sound
3.Call Lo
g
s
8.Unused
1.Auto Attndnt
2.System
9.Admin
Not Applicable
28
Making a 2-Way/ Intercom Call
The EnGenius Industrial Cordless Phone System offers private,
Intercom/ 2-way radio calls independent of the base station.
Intercom/ 2-way communication can be placed from handset to
handset.
Handset to Handset Calls
1. Press Intercom key followed by a two-digit handset ID or
Group ID.
2.
Press END key to end the call.
Notes:
1. Intercom calls can be made regardless if the Base Station is
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows “No
Connection” after a 12-second time out.
Making a Broadcast
1.
Broadcasting all handsets
a.
Press BROADCAST key from one handset
b. Hear bi-bi-beep while the initiating handset broadcast all
handsets within communication coverage
c. Start to speak the message to be broadcasted once you
hear the “beep” sound; the speakerphone of destination
handsets will be opened up
d.
Release BROADCAST key to end the broadcasting
27
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius Durafon 4X - SP922 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius Durafon 4X - SP922 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info