660387

Enersys ODYSSEY Battery Charger Manual

7
Zoom out
Zoom in
Previous page
1/14
Next page
General Overview
10
The ODYSSEY
®
Battery Portable Charger Series is our newest line of digital fully automatic
12 volt portable battery chargers, designed to fully charge and enhance the performance
and extend the life of ODYSSEY
®
and other quality brands of 12 volt flooded and AGM
(Absorbed Glass Mat) lead acid batteries.
Whether a professional shop user or the enthusiast doing a charger-to-battery match up,
our professional grade design delivers performance and quality. Our all digital power
charging platform is packaged in our most ruggedized and weatherproof housing for use
in all conditions. Designed to last, our Portable Chargers are fanless insuring a longer
lifetime of use without the need to replace failing or failed fans as seen in other competitive
products.
Featuring an intuitive LED user interface display, the ODYSSEY
®
Battery Portable Charger
sports a battery charge monitor providing an at a glance indication of charge level. In
addition, each model includes power-on self testing to confirm connections are correct
and that the battery can accept a charge, and that it is not below 2.5 volts.
In the event of a bad connection or a battery that is not able to accept a charge and may
be under 2.5 volts, a red LED fault indicator will turn on and the “System Check OK” will
not illuminate. Equally a successful self test will result in a positive “System Check OK”
LED illuminating followed by the charge mode operation.
Out-of-Vehicle Battery Charging Safety Precautions
9
22. FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE. A SPARK NEAR
BATTERY MAY CAUSE BATTERY EXPLOSION. TO REDUCE RISK OF A SPARK
NEAR A BATTERY:
CAUTION
a. Check polarity of battery posts. POSITIVE (POS, P, +) battery post usually has a larger
diameter than the NEGATIVE (NEG, N, –) post.
b. Attach at least a 60 cm 6-gauge (awg) insulated battery cable to a negative
(NEG, N, –) battery post.
c. Connect the RED POSITIVE (POS, P, +) cable clamp or ring terminal to the POSITIVE
(POS, P, +) post of battery.
d. Position yourself and free end of cable as far away from the battery as possible - then
connect the BLACK NEGATIVE (NEG, N, –) charger cable clamp or ring terminal to the
free end of cable.
e. Do not face battery directly when making final connection.
f. Connect charger AC supply cord to a properly grounded fault protected electric outlet.
g. When disconnecting charger, always do so in reverse sequence of connecting procedure
and break first connection while standing as far away from the battery as practical.
h. A marine (boat) battery must be removed and charged on shore. To charge it on board
requires equipment specially designed for marine use.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enersys ODYSSEY Battery Charger at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enersys ODYSSEY Battery Charger in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info