717802
9
Zoom out
Zoom in
Previous page
1/68
Next page
9
Computer instructions
SUMMARY:
This system is designed for programmable ROWING MACHINE. There are 3 parts to this System the monitor,
motor & controller and magnetic braking system.
A. Power up:
a. Connect all of the cables to the monitor.
b. After power up, all LCD segments will light up for 2seconds and CPU Will be
reset the resistance into level1. The monitor will go to initial mode.
1. If the connection cables were installed incorrectly, monitor will display
“E1”on matrix display and generate a beep sound. Before asking service,
please examine if all connection cables are well connected and then reset
the power to release the beep sound or press “START/PAUSE (Hold to
reset)”button to restart system. If the monitor still show”E1”message,
please call service.
2. If the monitor shows”E2”message, please call service.
B. KEY BOARD:
ENTER:
1. During PAUSE mode, press ENTER key to enter desired program.
2. Confirm the setting values of TIME, COUNT, DISTANCE, CALORLES and PULSE in
the heart rate control program8, and PROGRAM PROFILE in the user setting
program.
START/PAUSE/RESET:
1. To start or pause exercising.
2. Hold this button for 2 secondes can enter initial mode & reset all value to zero.
:
1. During the pause mode, select Program or increase the setting value of TIME,
COUNT, DISTANCE, CALORIES and PULES in the heart rate control program 8,and
PROGRAM PROFILE in the User setting program.
2. During the exercise mode, press this button to increase the load level.
,
-
:
1. During the pause mode, select Program or decrease the setting value of TIME,
COUNT, DISTANCE, CALORIES and PULES in the heart rate control program 8,and
PROGRAM PROFILE in the User setting program.
2. During the exercise mode, press this button to decrease the load level.
PULSE RECOVERY
Press this button going into pulse recovery detecting.
F1.0=Excellent F2.0=Good F3.0=Fair F4.0= below average F5.0=no good F6.0=Poor
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics ST 880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics ST 880 in the language / languages: English, German as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info